About GreenMan

GreenMan

Meraki Go Community is here: https://community.meraki.com/t5/Meraki-Go-Community/ct-p/go

Technichal

=Thanks GreenMan but we ant even see login page for dashboar, I think better to get in touch with Support in the region. Thanks

GreenMan

デフォルトでは、RSTP はリンクの速度を考慮する必要があります。 LAG 構成を削除し、10G リンクと 1G リンクの両方を使用して 2 つのスイッチを直接接続し、RSTP が 4 つのポートで有効になっている場合、1G リンクはそれ以上の構成なしでブロッキングとして設定する必要があります。

PhilipDAth

Can you try running it from a different public IP address as a test? Perhaps you are exceeding the rate limit with other scripts, or maybe your IP address has been black listed or something. Did any Windows Updates install themselves during the timeframe?

GreenMan

Yes - you can bind and unbind Networks to/from Templates with the following endpoints: https://developer.cisco.com/meraki/api-v1/#!bind-network https://developer.cisco.com/meraki/api-v1/#!unbind-network I don't believe there's a single endpoint to move a Network directly from one Template to the other, as can be done through the Dashboard: https://documentation.meraki.com/General_Administration/Templates_and_Config_Sync/Managing_Multiple_Networks_with_Configuration_Templates#Moving_Networks_Between_Templates

Bo_Tang

Actually no, I would suggest you to open a case with us first, once it was assigned, we can run some commands to check / capture in realtime. Be aware of some known issues-- if your MX use WAN2 or cellular as only uplink , you will get the banner saying your MX has trouble communicate with new IP range, but probably not at all, to confim it, just open case with us please

LouisGTZ

Thank you both. I was able to get the report, exported it to excel, in excel I highlighted duplicate network records and it highlighted all the sites with the two MX's in the network. Great! Thank you both.

GreenMan

No - you certainly wouldn't use it on live networks first - you'd set up a test-bed of some kind. But you'd probably want to do that for API too..?

nflnetwork29

this did the trick. much appreciated everyone who provided feedback!

Dunky

That's great news, sounds like dodgy hardware then. Thanks for letting me know, I will sleep easier knowing that I dont have to worry about hitting the same issue on my MX84's

cmr · ‎12-23-2022

@Ruch_D the Meraki switches are no less secure than traditional Cisco Catalyst or HPE switching etc. What @GreenMan is alluding to is that using a switch specifically designed for high throughput with stateful inspection to segment datacentre traffic is the best option. If you are comparing a Meraki MS350 to a Cisco 9300 or equivalent then they are no less secure.

GreenMan · ‎12-22-2022

I think you must be referring to the MX Warm Spare functionality, where a secondary MX unit will take over from a primary, should the latter fail. If this is indeed what you want to use, I'm afraid you won't be able to do it using an MX100 paired with an MX250 - the MX models must match exactly. For confirmation please see the Note near the beginning of the relevant documantation: https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair Unfortunately the MX100 is now End of Sale, so your chances of adding a second unit to it are probably slim. You may find that, through talking to your meraki account team, they can maybe help you with the cost of a new matched pair of devices, given that you have existing investment.

PhilipDAth · ‎12-21-2022

Any reason why you can't use TLSv1.2?

GreenMan · ‎12-21-2022

Can you confirm that the traffic involved is 'in-VPN'? The source VLAN needs to be VPN enabled in the Spoke MXs Addressing & VLANs config and the destination for the traffic needs to lie within a range of addresses advertised from (or via) one of the VPN Hubs.

Dev758 · ‎12-20-2022

There is a hotmail account. I'm now able to receive the 2fa pin via hotmail, but I'm not able to receive any of my alerts or summary reports.

GreenMan · ‎12-19-2022

FYI, the Meraki Go community is here: https://community.meraki.com/t5/Meraki-Go-Community/ct-p/go

Bargi · ‎12-15-2022

Meraki support person called and proceeded to read from a corporate comms stating how they've seen this activity accross multiple clients and should change passwords blah, blah, blah Offered to have their security team reach out, which I said yes and if they can answer why the 2fa email didn't come through. Checked the users laptop and it's fine and O365 logs show no emails from Meraki to them...

Keith_Li · ‎12-14-2022

so that once i claimed with the order number, all the AP will started to count for the license date, even i unclaim it, its not gonna stop the license counted day ? if it possible if i inform parnter to stop counted the license date for those AP that i will not need to use this moment ? and claim the AP serial no when i need to use them ?

jeanIoa · ‎12-14-2022

Yes Indeed but the config was empty - I didn't made a factory reset - I'm installing a lot of MX and the first time I had this problem with the 105

GreenMan · ‎12-14-2022

This is why safe config exists; if you make a change that causes the device to lose contact with Dashboard (so you can't fix it yourself), the device will choose to revert to the stored safe config, in the hope of restoring Dashboard connectivity.

Haavard_L · ‎12-13-2022

Thank you for your reply. We use small IP rated cabinets with routers inside an the modem placed on the outside. This is a mobile system and is moved around by our customers. Given the size, specially the mg41e, it happens very often that they break the antennas. I would like to place the modem inside the cabinet for protection, but then I have to use a extention cable to reduce the lenght of the modem by placing the antennas somewere else in the cabinet.

RZelle · ‎12-12-2022

Thanks Greenman, I opened a Ticket with support earlier as well. We are aware of what the documentation states.

GreenMan · ‎12-12-2022

For super-simple network management, in one place (the Meraki Dashboard), you would create a Combined Network (or Networks, for multi-site) using Meraki MS switches and Meraki MR Wi-Fi access points. Bear in mind, with this underlying platform you can then also closely integrate with Meraki Systems manager (for endpoint management), Meraki MT IoT sensors and Meraki MV CCTV cameras too - and uplink them all over cellular data, if necessary, using Meraki MG gateways. As of fairly recently, it's also possible to monitor some Cisco Catalyst switch models (9200, 9300, 9500) within the Meraki Dashboard, but that doesn't include the SG range

GreenMan · ‎12-12-2022

As @ww hints, the question here is; what role is the extra non-MX firewall there to perform? Most customers will, at branches, just have a/the routed mode MX. With the right license level, it's usually all the branch firewall you need. Except if you really have to perform https decrypt, in which case, pairing up the MX with Umbrella is probably the most scalable approach Hopefully you found this already but, for your DCs, go with one-armed VPN Concentrator MXs behind your DC firewalls, as per https://documentation.meraki.com/MX/Deployment_Guides/VPN_Concentrator_Deployment_Guide

alemabrahao · ‎12-08-2022

What do we mean by Airtime Utilization? Free airtime describes how much time is available on a channel for data transmissions. Any time a device communicates with another device or an access point (AP) it uses airtime. Airtime Utilization is a per-channel statistic that defines what percentage of the channel is currently being used, and what percentage is therefore free. Airtime usage can come from: Data traffic to and from client devices Interference from WiFi and non-WiFi sources Management overhead from APs and client devices

GreenMan

Community Record

Badges