MR46 ローカルでの運用

解決済み
NWSE
Conversationalist

MR46 ローカルでの運用

現在MR46をインターネット接続+DHCPでの運用をしておりますが、会社の方針もあり別のネットワークに載せ替えローカル+固定IPでの運用を考えております。仕様上クラウド接続での運用とは承知しておりますが、ローカルでの運用だとどうしても既定のSSIDを出さずmerakiとなってしまいます。

クラウド接続せず強制的にローカルでSSIDを出し運用するモードないし方法はないでしょうか?

1 件の受理された解決策
GreenMan
Meraki Alumni (Retired)
Meraki Alumni (Retired)

As per @cmr  - Meraki solutions are inherently cloud-managed.    While they will continue to function, in terms of carrying customer data, for quite some time during any interruptions in connectivity to the Meraki cloud infrastructure, they can't really be disconnected 'forever'.

 

Newer Cisco AP models - in particular WiFi7 APs (CW917x) - can operate either in Meraki cloud-managed mode or in an on-premise (i.e. no Internet connectivity) mode, though they would need a compatible Cisco Wireless LAN Controller to be reachable on the private network, for the latter.   https://www.cisco.com/c/en/us/td/docs/wireless/access_point/technical-reference/global-use-ap-dg.htm...

元の投稿で解決策を見る

2件の返信2
cmr
Kind of a big deal
Kind of a big deal

No, if it can't see the cloud it broadcasts the 'Meraki' setup SSID.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
GreenMan
Meraki Alumni (Retired)
Meraki Alumni (Retired)

As per @cmr  - Meraki solutions are inherently cloud-managed.    While they will continue to function, in terms of carrying customer data, for quite some time during any interruptions in connectivity to the Meraki cloud infrastructure, they can't really be disconnected 'forever'.

 

Newer Cisco AP models - in particular WiFi7 APs (CW917x) - can operate either in Meraki cloud-managed mode or in an on-premise (i.e. no Internet connectivity) mode, though they would need a compatible Cisco Wireless LAN Controller to be reachable on the private network, for the latter.   https://www.cisco.com/c/en/us/td/docs/wireless/access_point/technical-reference/global-use-ap-dg.htm...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.