Apologies, @DarkStar - sometimes our automatic spam filter is overzealous. Your post has been restored. Also, status.meraki.net now reports the dashboard being down as a known issue under active investigation (I believe this is separate from the issue with the "Get help & cases" page though). ... View more

I wrote this using the Meraki PowerShell Module. It doesn't reset them 100% but it is very close.  Note: This will reset all SSIDs for the entire organization use with caution. PowerShell Module  # Reset All SSID to Unconfigured v1.9 Import-Module Meraki $AuthToken = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" $OrganizationID = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" $SiteNames = Get-MerakiOrganizationDevices -AuthToken $AuthToken -OrganizationID $OrganizationID | Where-Object {$_.Model -like "*MX*"} | Select-Object Name,NetworkID $SiteNumber = 0 ForEach ($NetworkID in $SiteNames.NetworkID) { $SiteNumber = $SiteNumber + 1 Write-Host $SiteNames.Name[$SiteNumber] ForEach($Count in 0..14){ $SSIDName = "Unconfigured SSID "+$Count $SSIDConfig = [PSCustomObject]@{ name=$SSIDName enabled="true" authMode="Open" ipAssignmentMode="NAT mode" mandatoryDhcpEnabled="False" splashPage="none" perClientBandwidthLimitUp="0" perClientBandwidthLimitDown="0" perSsidBandwidthLimitUp="0" perSsidBandwidthLimitDown="0" } $SSIDConfig = $SSIDConfig | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSSID -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -SSIDConfig $SSIDConfig $trafficShapingRules = [PSCustomObject]@{ trafficShapingEnabled=$false defaultRulesEnabled=$false } $trafficShapingRules = $trafficShapingRules | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSsidTrafficShapingRules -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -trafficShapingRules $trafficShapingRules $L3FirewallRules = [PSCustomObject]@{ allowLanAccess = "true" } $L3FirewallRules = $L3FirewallRules | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSSIDFirewallL3FirewallRules -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -L3FirewallRule $L3FirewallRules } ForEach($Count in 0..14){ $SSIDName = "Unconfigured SSID "+$Count $SSIDConfig = [PSCustomObject]@{ enabled="false" } $SSIDConfig = $SSIDConfig | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSSID -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -SSIDConfig $SSIDConfig } }     ... View more

I think I actually found the issue you're having. I dug a bit deeper into the API docs and it looks like the lanIsolationEnabled setting is only available if you set your ipAssignmentMode to "Bridge mode"(this is also case sensitive because 🤷🏻‍♂️). Here is an example I was able to run successfully with Set-MerakiNetworkWirelessSsid: ... View more

Will MA-PWR-ETH not do the trick, is says its for MV2 and MT. ... View more

What is the latency you are experiencing?   Try temporarily disabling AMP and content filtering. ... View more

yes that is what I thought and would be the easiest way to configure what I am looking to do.  I have everything in place just wasn't thinking that way.... So I can make the adjustments needed and go from there.  Then I wouldn't have to worry about addressing and only where it is plugged in to.  Mostly for quick monitoring of clients on the meraki so I know where/what they are at a quick glance.  thank you for all your input ... View more

Yes, PDL conversion is now a gated/controlled process as noted here. I strongly advise you discuss the implications of moving to PDL with your Meraki Account Team.   If you're on Co-term today your Org has a single expiration date. If you convert to PDL each device will inherit this same expiration date as a starting point. The doc I linked has an example of this.   Your MS, MR, MV, and MT don't have a different expiration date from your MXs if you're on co-term now. ... View more

Has anyone tried this app? How does it work when the ISP is down. I need MX's to reboot after the ISP comes back on line. Does it schedule the reboot on the device and save it locally so it reboots even though there is no internet services? ... View more

Yes many  many times over the years. I have also talked about it with our Cisco rep and in our meetings when Cisco visits from out of state. ... View more

I'm guessing EE have got IPv6 to IPv4 working properly then, which is good 👍 ... View more

@BradB I recently completed the CMNO.  I'd like to see a training course based around each set of Monitor and Configure tools (Network-wide, Teleworker gateway), each one it's own couple hour to half day class that goes much more in depth on each and the capabilities.  Feels like having a hands on course would really help with the "How to's" with Meraki.  Also since there can be different levels of administrators, a course aimed at usage in that role? ... View more