@DavidLowe I said it right, thanks 😊   ... View more

@GAQS808 @I see various organizations with multiple vendor stuff and that’s fine. I even see companies uses Meraki Access points with Mist APs on different floors not sure why they did that.. May be sales pressure from different vendor 😀 but the overall infra is working very fine. So you are good to design whatever your requirements are and if you already have Poe switch with you then you don’t need that MS-120. ... View more

Yes you can do that. Have a look on the below document  https://documentation.meraki.com/MX/Networks_and_Routing/Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway ... View more

I am not sure may be TCAM table is full on the device leads to this kind of issue. I am glad you restored back ! Happy long weekend ! ... View more

This is something unexpected and really odd. You resolved your problem with rebooting MX84 ?  ... View more

Not sure but are you using API v0 ? Can you check with v1  API v0 https://developer.cisco.com/meraki/api/#!versioning/v0-deprecation--sunset    API v1 https://developer.cisco.com/meraki/api-v1/#!introduction/whats-new-in-v1  ... View more

Is that what you are looking for ? RestAPI response code and status Code Status Description 200 OK The request was successfully completed. 201 Created A new resource was successfully created. 400 Bad Request The request was invalid. 401 Unauthorized The request did not include an authentication token or the authentication token was expired. 403 Forbidden The client did not have permission to access the requested resource. 404 Not Found The requested resource was not found. 405 Method Not Allowed The HTTP method in the request was not supported by the resource. For example, the DELETE method cannot be used with the Agent API. 409 Conflict The request could not be completed due to a conflict. For example,  POST ContentStore Folder API cannot complete if the given file or folder name already exists in the parent location. 500 Internal Server Error The request was not completed due to an internal error on the server side. 503 Service Unavailable The server was unavailable.     ... View more

@Manish2 Sure buddy hope you got what you were looking for 😊 ... View more

As per i saw in most of the Big organizations, Compliance team come up to always go with the version code on N or N-1. I always keep my network N-1 as it takes time to have stability on the newer version. But here yes we can mix match the various firmware like N-1, N-2 whatever we have in our production environment. I agree with @KRobert to always check the newer version on the Spoke site first and once we have stability of the version put that version across for uniformity.   Regards Inderdeep ... View more

Check with the API call if you can achieve that. Not sure as i never did this kind of request..   Regards Inderdeep ... View more

RecentlyQueued   - A license that is being assigned to a device that already has an existing license. It will take 7 days for the license to merge. The license will not be queued if the device did not previously have a license.   Hope it clears @Manish2 @RomanMD    Regards Inderdeep Singh ... View more

Yeah the motive is to help everyone, if we can because sometime people dont know from where to start as many times with me as a case, a quick indication makes as a reference point and leads to get the idea of doing the things in better way. I did uses APIs but never worked this kind of report pulling.. : )   Thanks anyways for guiding us !   Regards Inderdeep Singh www.thenetworkdna.com  ... View more

I am not sure if we can achieve that with the APIs. May be leaders can guide here @PhilipDAth @cmr @DarrenOC @BrandonS    Regards Inderdeep ... View more

It seems to be disabled i think    Regards Inderdeep ... View more

Yes you can do that     Regards Inderdeep ... View more

@Riser : I never tested this but i think you can do that with RESTAPI from the Meraki and get the data in JSON format https://developer.cisco.com/meraki/mv-sense/#!rest-api/enable-api   And on other hand in PowerBi according to the content in the link that the API Reponses in JSON, you can get the data by using "Get Data"-->"Other"-->"Web". And then extend JSON to a table in query editor.   eg.   http://jsonplaceholder.typicode.com/posts/1/comments You can replace it with a link like "http://[school].myschoolapp.com/api/academics/department/?t=[token returned from previous step]" in your link. Regarding refreshing, you can publish it to Power BI Service and schedule refresh. Let me know if it resolves    Regards Inderdeep Singh   ... View more

@Jonboy : vMX  is a virtual instance of a Meraki security & SD-WAN appliance  You can check the below deployment guide for the vMX in Azure environment https://documentation.meraki.com/MX/Deployment_Guides/Cisco_Meraki_MX_Branch_to_Azure_Virtual_WAN_Deployment_Guide   What is the exact use case you are looking for ? If you have something specific let us know to figure out whether that is achievable or not via vMX ? Check the features below https://meraki.cisco.com/product/security-sd-wan/virtual-appliances/vmx-small     Regards Inderdeep Singh www.thenetworkdna.com  ... View more

@AutomationDude :  ECMS1 is an practical course, The most of the things showing there is how to do the implementation & Troubleshooting. Secondly yes Prerequisites as CCNA required. Check the last line on the below link for the Lab expectation. Best of luck ! https://www.cisco.com/c/en/us/training-events/training-certifications/training/training-services/courses/engineering-cisco-meraki-solutions-part-1-ecms1.html#~course-details   Regards Inderdeep Singh ... View more

Follow this document and check it helps you  https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points   Regards Inderdeep   ... View more

@SandroNardi : Thanks for sharing this video 🙂     Regards Inderdeep Singh ... View more

@PhilipDAth yeah right quick response of dashboard to see further things. That should be first thing to notice 😀   Regards Inderdeep Singh www.thenetworkdna.com  ... View more

I may expect, But try this   When a tunnel drops, it's route is dropped as well, along with all affected sessions. Consequently, the outgoing traffic to the remote private network is sent out along the default route, usually through the WAN interface.   But, the Fortigate will establish a session for it, as there is a valid policy from LAN to WAN, destination ALL. Now when the tunnel comes back up, there is already a current session which has to time out first before a new session through the tunnel can be established. This causes a major delay in the data flow.   May be FIX  Create blackhole routes for traffic to RFC 1918 subnets, that is, 192.168.0.0/24, 172.16.0.0/12, 10.0.0.0/8 among others. These routes need to have a distance of 254 (not 255!) in order to kick in when there is no better route available. The route will be used when the tunnel goes down and traffic will be discarded; NO session is established. When the tunnel comes up again, a new session can be built right away, without any delay. ... View more

I used to check network trend which includes top applications,power consumption, bandwidth consumption and new firmware update if any available over the period of time.  ... View more