Use a paperclip and push the reset button for about 15 seconds. ... View more

We have got in every second line an accesspoint in our warehouses. where not then alternately, on the opposite site. And with patch antennas facing in the shelfe alleys. Running with 12MBit minimum. Autopower. Mixed 2.4GHz and 5GHz. Each line is about 60m (about 200ft) long. ... View more

Thank you. i will keep an eye on it. ... View more

It's a pitty that the hotline service wasn't informed and didn´t know anything   ... View more

The C3560CX-8XPD had been my first choice in the past. Now I would go with the CBS350-12NP-4X. With 4*SFP+ you can also connect the MX WAN-ports with DAC-cables instead of SFP+. And not using a Meraki Switch for the WAN switch removes the hassle with cloud-connectivity from the WAN-side to the internet. ... View more

-Yes, it´s working. ... View more

Yes, with Apple devices I see the same issue, especially with Apple TV devices, also Apple TV devices are causing CRC errors on Meraki switches (but not on Cisco "classic" switches!) ... View more

We are running a Cisco Classic network with Cisco Catalyst switches. They are running with PVST. But we connected Meraki-Switches without any issues. You need to have VLAN1 as standard VLAN. And don´t connect Cisco classic, Meraki, and again Cisco Classic in a row. In the end our core and some distri-switches are Cisco classic and userswitches are Meraki.   https://documentation.meraki.com/MS/Deployment_Guides/Advanced_MS_Setup_Guide ... View more

I have seen painted accesspoints in the Europapark Rust. They are good hidden now, like camoflage. By the way there where not Meraki but Cisco "classic" accesspoints.  https://www.europapark.de/en ... View more

Put on the switchport where the accesspoint is connected to the native vlan where the accesspoint has to be and has to get dhcp.   ... View more

Hmm, you are probably referring to the MX VPN functionality? This is MR beta 🙂 ... View more

@PhilipDAth I´d agree. But Sometimes when upgrading and rebooting the stack there is a STP trouble while the stack is booting and the firmware is not finished booting up and not finished creating the aggregat / etherchannel. ... View more

Thank you. ... View more

Congrats to the winners! ... View more

Cameras are a difficult thing in Germany. It´s not allowed at most places. ... View more

Hey Everyone,   Just wanted to confirm what Gary has posted as the solution on this thread.   If anyone has any lingering issues, please check in with your ISPs and/or reach out to Meraki Support.   If anyone has any specific questions for myself please don't hesitate to send me a DM.     Rodrigo Meraki Support  ... View more

I realize that this is an old thread but thought I would update with information that would be relevant in today's environment.  I had similar issue and the solution was to enable VLAN 1 on the core switch and walk it down to the other switches.  After doing so the switch status will update to point to the Core Switch as being the Root Switch in the topology.  Here is an article that was provided to me for further reading.   Identifying Root Switch:  https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Determining_the_RSTP%2F%2F%2F%2FSTP_Root_Bridge_on_an_MS_Switch_network   Configuring STP on Meraki Switch: https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Configuring_Spanning_Tree_on_Meraki_Switches_(MS)   Advance Setting of STP on Meraki Switches: https://documentation.meraki.com/MS/Deployment_Guides/Advanced_MS_Setup_Guide#Spanning_Tree_(STP.2C_RSTP) ... View more

Just one other thought - make sure your Meraki APs can reach the Internet  (i.e. the Meraki cloud platform). You may need to open some access for this through your network and perimeter firewall;   check out Help > Firewall info, from the Meraki Dashboard, for the holes you need. ... View more