Hi @redsector, Please let's try to be respectful here. I'm not trying to accuse you of anything, just trying to help since I saw noone replying to your request. Based on my experience, packet capture is the step that helps in most cases to understand whether there is some traffic on the link or not, and mostly people forget about this step. You can collect them on the upstream device, not the AP which is offline, as I mentioned in my comment: "If your AP is connected to Meraki device upstream, you can leverage Dashboard Packet Capture utility to collect pcaps.". Obviously this applies to any other devices upstream that are capable of collecting pcaps. ... View more

If your AP's are offline(Via Port Scheduling)during the weekend and you have Staff in on a Saturday (Assuming that these staff do not have admin to the Meraki Dashboard to reactivate the POE/disable the port schedule) How would you bring everything back online?? Do you have some form of automation for this? thanks ... View more

this is true which we all know by now. there are however gotchas that are serious and you might not want to do this as the Cloud Monitoring Tool for Catalyst makes a scad of changes including SNMP v2c using the Community Public. This is bad, bad, bad and our pentester has ordered us to delete the line. SNMP v3 has been out for ages and is always preferred over v2c. and for gods sake why use the hackerfriendly community of Public?  Our CISO says Cisco is not a security company and that sure is one proof of it. ... View more

There, you configure the servers. But you can't use them for wireless yet.  ... View more

Funny thing, that this stil persists across all the switching SW trails .. ... View more

I have a setup of Cat 9k Meraki all having this UDLD issue on copper ports, all connecting to C9300-48UXM and C9300-48UXM uplink to MX. 1 C9300-48UXM 2 C9300-48U 2 C9300-48P   4 of the setup are now running CS 16.9 and seems stable for the past week after i did the firmware upgrade but one unit of C9300-48P is still refusing to function properly, may need to directly link it to the MX to allow proper upgrade of the firmware. ... View more

Same issue here, I was using slot 10 with radius and it broke.  Moved the network to slot 8 and clients are connecting again. ... View more

You should be able to set up the users with access to certain cameras and/or feeds, so that they can log in and access the Vision Portal and leave it up. I know this is 4+ years after you posted this, and you may already know this, but there was some problem that was just resolved in ver. 1.22.1 of the Vision Portal that was either still a problem causing idle timeouts, or had been previously fixed, then returned as problem -- https://documentation.meraki.com/MV/Viewing_Video/Meraki_Vision_Portal_Changelog ... View more

Is this a known error on 17.x or was it also there previously ? , I think I just encountered it today 😕 ... View more

@thaack ok sir I will try the meraki support now. Thank you. ... View more

Yes, Service don´t know anything ... View more

That's not the way wireless infrastructure is typically designed and deployed. Are you concerned too many devices may connect to a single AP? If that's the case, you may need to increase the density of WAP's in that area. Or use a feature such as client balancing. If you're concerned about bandwidth usage on an individiual AP, you can set per-client traffic shaping (under Wireless -> Traffic shaping). ... View more

another thread about this here   https://community.meraki.com/t5/Wireless/30-7-Update-Breaks-RADIUS/m-p/241979#M33274 ... View more

Set the native VLAN number for the accesspoints VLAN. ... View more

We always use trunk to the accesspoints, then you can use one SSID for internal VLAN, a guest SSID for Guest VLAN and one VLAN as native VLAN for the Accesspoints.     ... View more

It's undergoing changes and was pulled for the time being ... View more

expensive => this Catalyst stuff with special stacking cables and so on. sorry that good things like MS425 are out of sale. ... View more

For Meraki devices this doesn't make much sense. ... View more

These are 2 Racks recently done bij me, april 2024, i used Unifi slim Patchcables CAT6: Before P1 After P1 Before P2 After P2 ... View more

Its long SOLVED! The simple solution is to register Apple TV in HomeKit and the problem is gone! https://discussions.apple.com/thread/253793772?sortBy=best ... View more

I haven't looked into group policies and also not going to use the templates. When you use templates, you lose some flexibility. For example, let's say you want to use a different VLAN ID for some of the networks or do you want to create a specific SSID in just one network. considering all of this, using config templates didn't make sense. Make you you test them properly before proceeding.  ... View more

Multi-VLAN is supported with MR 18.1 and higher. It is a closed Beta, you have to open a support ticket to activate it. So your test installation needs to be a separate organization, because those features are activated per org and not per network. https://documentation.meraki.com/MR/Deployment_Guides/Mesh_Deployment_Guide#Multi-VLAN_support_over_Mesh ... View more

In your place, I would avoid using a Meraki Switch for a data center, due to limitations, of course.   Cisco Feature Navigator can help you. https://cfnng.cisco.com/browse/switching/features ... View more

Sorry to reopen this thread, but I want to see if I understand how UDLD and STP guard should be set up on my topology. Here's the high level image from the dashboard. Very simple hub-spoke. Single uplinks from IDFs (either a stack of two or just a single switch) run back to MS425. Do I enforce UDLD and loop guard both ends, or just the uplink port for the IDF?   ... View more

To fix wifi calling issue over Guest wifi I did the following Allow UDP port 500 and 4500 in firewall and traffic shaping Local Lan is still disabled, but wifi calling is still working We are using External DHCP server assigned instead of NAT To test the wifi calling I turned on airplane mode and turned on Guest wifi. I was able to make calls successfully AP MR42 ... View more