Thank you.  That is what I thought.  I just read there is an update that fixes the SSID limitation.  I may try in on a smaller site. ... View more

I tried but some sites it's not an option.  I can't find the way.   ... View more

I was very pleased with Prime, Lan controllers, and Cisco access points for years.  The horror story is Cisco jacked the prices up so high, we could not afford it any longer.  I was forced to deal with Meraki for the remainder of my time here.  Maybe not an actual horror story but I really miss lan controllers ... View more

I looked and it is not enabled.  Actually if I don't use radius on the networks above slot 8, they seem to work.   I only have two networks with 30.7, I was able to roll back the rest.    ... View more

Same issue here, I was using slot 10 with radius and it broke.  Moved the network to slot 8 and clients are connecting again. ... View more

The problem I have with this version is connecting to any SSID passed 8.  I have 10 configured and the clients would not connect to it but do see it.  I renamed it to old and configured said-8 to that one and they are connecting fine.  Some of my networks are still 29.5 and they are fine.  30.7 does not like more than 8 SSIDs it seems. ... View more

As much money as we pay, our equipment should come with a box off shirts.  Want my opinion?  Do better.  ... View more

They just do this.  I found I have to look at the real one that has the lease, turn it into a reservation, then reboot the conflicting one.  It may grab another and `I will have to do it again.  I told tech support about this behavior and they said it was the first they heard of it.  I have received this answer several times.  I miss real Cisco APs, lan controllers, and Prime.   ... View more

I guess this is still an issue.  Mine does the same thing ... View more

Also look at the access points ethernet port.  I had a batch that had a problem with one of the pins collapsing.  So they powered up but would not connect to the network.  Even worse was they worked at my office when I prepped them (first time plugged in) then at the site, no go.  Tersted cabling, replaced a couple then found this issue on a forum since MR3X models.  I had 30 out of 1000 that ended up like this. ... View more

One reason would be we have been waiting on Meraki switches for almost a year.  ... View more