Meraki

rwiesmann · ‎Jun 5 2020

to cancel the scheduled firmware upgrade, check out the following documentation. https://documentation.meraki.com/zGeneral_Administration/Firmware_Upgrades/Managing_Firmware_Upgrades#Rescheduling_or_Canceling_a_Firmware_Upgrade hope this helps roger

rwiesmann · ‎Jun 5 2020

Hey, here is the documentation how to manage firmware of meraki. https://documentation.meraki.com/zGeneral_Administration/Firmware_Upgrades/Managing_Firmware_Upgrades and here the best practices for the MR's. https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practices_for_Meraki_Firmware#Best_Practice_for_MR_Firmware do the upgrade and check afterwards if you still have the disconnects. hope this helps roger

rwiesmann · ‎Jun 4 2020

Congratulation to all of you! Keep posting!

rwiesmann · ‎May 19 2020

Yes, i would say so.

rwiesmann · ‎May 19 2020

Yes, you can create additional walls in order to support more cameras. See also this part in the link you posted below about the following question I'd like to know what is mean "never had more then 16 cameras" ? In a organization, How many camera can I install ? only maximum 16 ? Where did you read that? You can support as many cameras as you want on an organization...at least I do not know about a limit. rgds roger

rwiesmann · ‎May 19 2020

Hi, never had more then 16 cameras, but i understand it exactly as you mentioned it. For example, 1 page video wall shows 16 video and 2 page video wall shows others. Yes, So you have then several tabs to switch between the different video walls If I want to show all the video, Should I open 2 dashboards to open 1 page and 2 page both ? Yes or switch between the different taps if this is feasible. hth roger

rwiesmann · ‎May 4 2020

Congrats to all of you! Well deserved!

rwiesmann · ‎May 4 2020

Congrats @cwf ! Nice to read.

rwiesmann · ‎Apr 28 2020

Congrats to @PacerX ! Also thanks a lot to @MeredithW for the great contest....we are already waiting for the next one 😉

rwiesmann · ‎Apr 23 2020

The MX-68 has 2 POE+ Ports, see Datasheet: https://meraki.cisco.com/products/appliances/mx68 As I know can you power the Meraki AP's. See as a sample the datasheet of the MR56 (Power): https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet#802.11ax.2C_802.11ac_Wave_2_and_802.11n_Capabilities rgds roger

rwiesmann · ‎Apr 22 2020

Is there someplace an overview of all available badges?

rwiesmann · ‎Apr 20 2020

Final days...keep going! 😊

rwiesmann · ‎Apr 14 2020

Congrats to all of you...keep going and enjoy the day as well as this great contest!

rwiesmann · ‎Apr 10 2020

Thanks, good to know!

rwiesmann · ‎Apr 8 2020

Hi, check out the documentation on VR for the MV21 https://documentation.meraki.com/MV/Viewing_Video/Viewing_Video_with_the_MV32#VR_Experience I also have seen the following announcement on RTSP support for the MV21: https://community.meraki.com/t5/Smart-Cameras/MV-now-has-RTSP-support/m-p/82620 Hope you can find the needed information in there rgds roger

rwiesmann · ‎Apr 7 2020

Happy that I could help you Thomas Roger

rwiesmann · ‎Apr 6 2020

Great, keep posting and commenting

rwiesmann · ‎Apr 3 2020

Hi Nikolai, I have this slides which helped me a lot about Co-Termination and PDL. For me the advantages on PDL are good for Service Providers, because it allows them to move licenses from and to different organizations with also the support of individual device shutdown. Also good to know is, that it is only a one way conversion. Did not hear about phase out one of the licensing models and I think it is a good thing to have both options. hope that helps roger

rwiesmann · ‎Apr 3 2020

Hi, as I know you will have 3 Options. Option 1: You just pull power via PoE. With or without the heater (802.3af/802.3at). Option 2: Use the Meraki Ethernet Injector Meraki 802.3at Power over Ethernet Injector Datasheet https://meraki.cisco.com/lib/pdf/meraki_datasheet_poe_8023at.pdf Option 3: This would maybe an option for you, if you have some low voltage source close by. This accessory converts existing low voltage (12VDC/24VAC) power supplies into PoE. https://meraki.cisco.com/lib/pdf/meraki_datasheet_low-voltage-power-adapter.pdf Also in the Datasheet you can get some and useful information concerning the power options...but i guess you know this datasheet 🙂 https://meraki.cisco.com/lib/pdf/meraki_datasheet_mv72.pdf Hope that helps you rgds Roger

rwiesmann · ‎Apr 1 2020

Hi Donavan, many thank for your video...like to see such tipps more often! They help on our day to day work.

rwiesmann · ‎Apr 1 2020

@DarrenOC Congratulation and well deserved! Great to read the post about you.

rwiesmann · ‎Mar 30 2020

Wow, I am very surprised that a made it to Tier 2. Happy posting to all of you!

rwiesmann · ‎Mar 24 2020

Cool, i like this contests Meredith

rwiesmann · ‎Mar 24 2020

Hi, once logged in...just click on your username and a drop down menu will open on which the customer number is visible. also check out the documentation. https://documentation.meraki.com/zGeneral_Administration/Support/Locating_the_Meraki_Customer_Number_or_Support_Passcode hope this helpd roger

rwiesmann · ‎Feb 25 2020

That's it! Thanks a lot

About rwiesmann

rwiesmann

Roger Wiesmann

Community Record

Badges