@cmr I have also seen this in the rel notes and was wondering if it may be this ... View more

Feedback gladly provided ... View more

check this community post https://community.meraki.com/t5/Wireless/Meraki-MR-Local-Auth-Error-17/m-p/246410 ... View more

The MR53 and MR56 do not support the 6Ghz...see the datasheet. https://meraki.cisco.com/lib/pdf/meraki_datasheet_MR53.pdf https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet   MR57 and the new AP's CW9172H, CW9172I, CW9176I, CW9178I, CW9176D1 will support it. But can not tell you about any restriction on Vietnam.  ... View more

Sorry, did overread the "will be available in a future software release" and thought that it will be supported with the release mentioned in that other document. Well, I guess it will not take to long for that ... View more

Not done it myself...but it's supported https://www.cisco.com/c/en/us/products/collateral/networking/wireless/wireless-lan-controllers/cat-cw9800h1-cw9800h2-wireless-controllers-ds.html   And some info's on SW Release: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-16/config-guide/b_wl_17_16_cg/m_cloud-monitoring.html   Hope this helps ... View more

The link below explains it well https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Moving_Devices_between_Organizations#Moving_Licensing   First you need to be an admin in both organization. Remove and unclaim the device in the old org Claim the device in the new org (needs some time till the device can be claimed again).   In Co-term organization it is possible to move the licenses. Check out the according documentation. https://documentation.meraki.com/General_Administration/Licensing/How_to_do_a_License_Transfer_in_Cotermination         ... View more

Congrats to everyone here, especially @Jobsp, @EvaF and @PaulF !! 👋👏 Keep going!   Also @AmyReyes thanks for supporting this community.     ... View more

Well, here are some information on how to add an additional License within an organization. You need a valid license for that.   https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_-_License_More_Devices_vs_Renewal#:~:text=On%20dashboard%2C%20navigate%20to%20Organization,devices%20or%20Renew%20my%20term   You also need to claim the AP https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Using_the_Organization_Inventory   And if you would like to add a whole bunch of devices https://documentation.meraki.com/General_Administration/Licensing/Meraki_Hardware_and_Software_Onboarding_Guide   ... View more

No, just adapt the name according your needs ... View more

Well thanks for the update.   One point to the topic of a new article MS Device Health...it seams that not all switches do support the new Device Health all the way as decribed even in the documentation is writen all MS200 series.   As a sample here is the MS220-8P which does not show the CPU and the protocols. Maybe this is a limitation on old ones? ... View more

Well thanks for the hint. Looks nice and gives more (as the old device health) and helpfull infos for the device. But it seams that not all switches support it, even with the right firmware...as a sample the MS220-8P does not show the new metrics...at least on the org I activated it. ... View more

Do you you have any Event log entries on that day for the switch...there you maid see what happened. And can you see that the ports where the AP are connected still providing PoE?   Bevor going onsite I would for sure, first cycle the ports and if this did not help reboot the switch. For me it looks like the switch has some problems with providing PoE. ... View more

The device seams still to be claimed...so you need to have the previous owner to unclaim the device.   Or I guess support could also help you   sorry wrong...meraki support can not help you...see following documentation https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Cisco_Meraki_Devices_purchased_Second_Hand#Devices_are_Removed_from_the_Previous_Owner's_Dashboard_Account   So you need to contact the previous owner ... View more

I guess this is what you are looking for   https://documentation.meraki.com/MR/Encryption_and_Authentication/Sponsored_Guest   ... View more

I agree on @PhilipDAth...for such a large setup I would also involve Meraki SE from Cisco. ... View more

well...interseting...thanks for that update ... View more

Gladly...I had the same problem with an installation once...I solved it with an extra MX. I connected the extra MX to the same LAN as the Hub and did static routing in betwenn. The extra MX I used only to set up the IPSec Tunnel. Not sure if it now could be solved somehow with BGP. ... View more

you should find it here https://documentation.meraki.com/MV/Advanced_Configuration/Restricting_Access_to_Cameras ... View more

Did you also check the cable...if not try using a different cable.   ... View more

@Mloraditch congratulation to this achievment 👏 ... View more

Well, i guess you will like it...but it always depends on what your needs are. You mentioned already some of the points and i would also point out the possibilities to leaverage your solution with the possibilities of the API's. Enjoy it...this will be e an interesting journey! ... View more

Are the MT15 and the Button connected to the same MV/MR Gateway?   Just asking because the MV/MR need a certain version in order to support it.   Minimum firmware requirement:  MR - 28.6+  MV - 4.16+    https://documentation.meraki.com/MT/MT_General_Articles/MT_MQTT_Setup_Guide     ... View more