response = dashboard.organizations.getOrganizationConfigurationChanges(ORG_ID, total_pages=1)   does also not contain any port information ... View more

Do you use meshing in the network? If not, just disable it entirely; Network-Wide -> Configure -> General. ... View more

Excellent news! Thanks @Ryan_Miles  ... View more

I know the solution is simple : remove the "dormant" or inactive Hub(s) , but these dashboard checks are way out of control.    Can't configure a group policy because you have a offline vpn concentrator ? Makes 0 sense.  Can't configure a DHCP ip-helper if the IP is not in the routing table ... Can't configure a syslog server if the IP is not in the routing table ...  [...]   That's not really ZTP friendly.  My yearly rant is done 😁 ... View more

Note that the MG21 is having issues (some firmware near future should fix this though)..   MTU size is default 1280 on a MG21. Call support for a patch they can run. So the MG21 will start to use MTU1500. ... View more

That badge definitely brings joy! Thanks @CarolineS, and congrats @RaphaelL for being our inaugural bookworm badge recipient! ... View more

But honestly, I think there's a huge missed opportunity with it not supporting 5G. It's still only a 4G device. ... View more

I could request a support ticket 😂 😉 ... View more

As @Phil9 has mentioned, if you need to reboot the AP everytime you have a power outage in the network(s), you have something fundamentally wrong which perhaps you may want to solve urgently. It's also quite a question on how you will do this. How are you going to deploy some kind of monitoring on this? Checking if the APs replying to ping, or using API to check if APs are offline in a timely fashion, etc?   Anyway, given it's a rare case that we move around APs, to build a database on where the APs are connected to your switch, a simple way is just to download the information on the Meraki dashboard (Network -> Wireless -> Access Points) and make sure you have the "Ethernet 1 LLDP" column checked and then download it as csv. Of course, you will then have to work on the column as it will give you "[switch name]/[port id]" by leveraging it to contain switch serial, for example, and maybe other information that you need (switch IP address, etc) When you need to reboot your APs via API you can use https://developer.cisco.com/meraki/api-v1/cycle-device-switch-ports/ based on the database that you have built.   Again, as mentioned previously, something is wrong if you have to do this everytime you have a power outage on the network. ... View more

Hey @jbright ,   Thank you for bringing this up, the warning you're seeing is correct - version 4.0+ of the agent requires Windows 10 22H2 (OS build 19045) and above or Windows Server 2022.   I have asked the team to update the Supported Operating Systems KB to reflect this, there's also a request to improve the error that is displayed (to include a specific callout for Windows Server). For Windows Server 2016/2019, you'll need to remain on agent version 3.8.2.    Cheers,   Connor ... View more

I’m seeing them in 207. Hadn’t noticed it before, but they are present at least a month back in the event log.   scheduled an upgrade to 208 in a couple of days. Will check up on it then. ... View more

Thanks @Ryan_Miles I reported this when the new login page launched, hopefully it will be fixed soon as it is a right pain! ... View more

Do you think that with more patience, the Wi-Fi would have been operational again? Perhaps after a few hours? (even if the my gateway was ko) ... View more

I found it.  the output splits the stacked switches, and put my 3rd switch which is standalone sandwiched in between.   Thank you again! ... View more

Here is a working site with old and new topology views: I think the text in the new one is way too small, but otherwise nicer.   If you hover over a link from a Meraki switch then you get more information:   The port information at the top is interesting as it contains the same bug that got the MX port page pulled, the cable actually goes into port 7 on the MX, but CDP/LLDP shows it as port 3, so that is what shows here:   I think the WAN ports are being ignored and then the LAN ports are counting up from 0   ... View more

To expand on this, create a layer 3 outbound firewall policy to block these ports that @RaphaelL says above:   ... View more

I see 18.208 is out but I've not been able to test to see if the issue is resolved or not. ... View more

Ryan saving the day once again. Thanks a lot. Been trying to find that document. ... View more

Correct. This came in yesterday evening.   Hello, Cisco Meraki is announcing an update to our network assurance licensing platform. All Meraki Insight product functionality will remain active and now be included under the upgraded SD-WAN Plus and Per-device SD-WAN Plus licenses. Before July 26, 2024 The Meraki Insight license will still be available for purchase prior to July 26, 2024. New customers intending to utilize Meraki Insight (MI) functionality are recommended to instead purchase the SD-WAN Plus or Per-device SD-WAN Plus licenses, available via the co-term model. For existing customers, MI product functionality will not change for the duration of their license. If an existing customer’s license expires before July 26, 2024, the recommendation is that they should purchase SD-WAN Plus or per-device SD-WAN Plus licenses. After July 26, 2024 The Meraki Insight license will no longer be available for purchase after July 26, 2024. New customers and existing customers have the option to purchase SD-WAN Plus or Per-device SD-WAN Plus licenses via the co-term model to utilize MI product functionality. For existing customers, MI product functionality will continue to function until the expiration of their current license. After license expiration, the MI product functionality will only be available on the SD-WAN Plus or Per-device SD-WAN Plus licenses.   Licenses being replaced     Replacement Model   LIC-MI-XS, LIC-MI-S, LIC-MI-M, LIC-MI-L, and LIC-MI-XL for 1, 3, 5, 7 and 10 years.   SD-WAN Plus, Per-device SD-WAN Plus   We will be accepting final orders for the outgoing Meraki Insight standalone licenses until July 26, 2024. End-of-Support date for Meraki Insight Standalone licenses will be July 26, 2029. Best, The Cisco Meraki Team   ... View more

i called meraki support hotline and they suggested me to upgrade to latest firmware version, so now is in version MR 30.5, i will ask customer to check in their firewall tomorrow to see if the problem still occur, so any solution for this case as i see the post above has not been resolved  ... View more

It was resolved 9 hours ago according to the status page. ... View more

This was resolved 9 hours ago according to the status page. ... View more

Done. ... View more

And that UI is only present because you enabled Org-Wide Radius server which is a feature currently in Early-Access.   EDIT : I had already "flagged" this via : https://community.meraki.com/t5/Dashboard-Administration/Org-level-RADIUS-Server-Open-discussion/m-p/214190 ... View more