Global client bandwidth shaper on the Meraki

Solved
RahulPrasadh
Getting noticed

Global client bandwidth shaper on the Meraki

How to configure a global client bandwidth shaper on the Meraki of 100MBPS/per client. With the exception of IPs in the range and ignoring the shaper and having unlimited bandwidth. Please share If there's any documentation that could support configuration.

1 Accepted Solution
RaphaelL
Kind of a big deal
Kind of a big deal

Hi ,


I assume you are using a Meraki MX. If so you can configure a global shaping of 100Mbps in the page : SD-WAN & traffic shaping

 

RaphaelL_0-1730815625384.png

 

 

To have some clients ignore the shapping you can create a Group Policy and do the same thing but configure : Ignore bandwidth 

 

RaphaelL_1-1730815707321.png

 

You can then apply that Group Policy to a VLAN or directly to clients.

View solution in original post

3 Replies 3
RaphaelL
Kind of a big deal
Kind of a big deal

Hi ,


I assume you are using a Meraki MX. If so you can configure a global shaping of 100Mbps in the page : SD-WAN & traffic shaping

 

RaphaelL_0-1730815625384.png

 

 

To have some clients ignore the shapping you can create a Group Policy and do the same thing but configure : Ignore bandwidth 

 

RaphaelL_1-1730815707321.png

 

You can then apply that Group Policy to a VLAN or directly to clients.

RahulPrasadh
Getting noticed

Creating a QoS rule with those subnets won't work? with unlimited bandwidth and high priority.

RaphaelL
Kind of a big deal
Kind of a big deal

Yes , that should also work. There are more than 1 way to achieve your goal

Get notified when there are additional replies to this discussion.