Optical focus only works immediately after I reboot the camera.
@Porcap what firmware are you running, what is the power source and has it always been this way?
MV 4.13
POE - Installed 1 month ago
upgrade to 4.14 and see if that helps
one of the fixes in 4.14 is
How do I upgrade firmware on 1 camera?
You set firmware at the network level via the Org > Firmware upgrades page.
>How do I upgrade firmware on 1 camera?
You have to upgrade all the cameras in the same network at the same time.
To do a single camera you would have to set up a separate network and move the camera into it.