Two static IP, one wlan

MCSDaniel
Comes here often

Two static IP, one wlan

I have a question we have an MX85. Fiber coming into the build with 5 Static Ip. I want to assign one IP to the PBX system. The modem only has one port for the ethernet cable coming off it to the WLAN port.

 

Do I VLAN the port on the MX to point to the static IP I want it to us or am I missing something?  

 

xxx.xxx.xxx.1 Data Vlan 1

xxx.xxx.xxx.2 Phones\PBX vlan 120

1 REPLY 1
PhilipDAth
Kind of a big deal

You would normally put the PBX on the inside of your network using a private IP address, and then perform a 1:1 NAT from a public IP from your provider to the PBX.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels