No permissive policy. Also tried to create new group policy with a block all url but still any websites are accessible in client side. Category base blocking is working.       Thanks   ... View more

Thanks. Unfortunately, I'm leasing the system from AT&T which has been an absolute nightmare. As such, Cisco/Meraki just sends me their way and they have been abysmal when trying to get help hence I try to fix things myself first, then come here if I can't.    At any rate, it fixed itself which is frustrating but at least it's fixed.    Thanks for the reply. ... View more

Hi! Meraki AnyConnect does support certificate-based authentication, which can be used to configure AO VPN. See our guides for additional reference:  https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance/Client_deployment#Always_On_VPN https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance/Authentication#Certificate-based_authentication_with_Username_.26_password    Hope this helps!  ... View more

Curious on this btw-   Don't think "we" consumers get a choice on this ... View more

Hi,   Thank you. I was looking for it so that i can do configuration hardening so easily.   ... View more

My L8 filter works pretty well between keyboard and chair 😉 ... View more

Few things that you can try: 1. Forget the SSID and then try again 2. Open browser and navigate to www.example.com or   http://escapessl.com and check if the page gets redirected to the splash page. 3. Check the Splash page frequency, reduce that to a shorter duration. ... View more

Indeed, this was changed as part of the request you made in this community post 🙂  ... View more

Welcome!!! ... View more

I have tried but same error below is the script and output: script: $apiKey = "api key" $serial = "serial number" $url = "https://api.meraki.com/api/v1/devices/$serial/switch/ports" $headers = @{ "X-Cisco-Meraki-API-Key" = $apiKey "Accept" = "application/json" } $response = Invoke-RestMethod -Uri $url -Headers $headers -Method Get $response   Output: Invoke-RestMethod : The remote server returned an error: (400) Bad Request. At line:7 char:13 + $response = Invoke-RestMethod -Uri $url -Headers $headers -Method Get + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-RestMethod], WebException + FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeRestMethodCommand     ... View more

https://documentation.meraki.com/MX/Client_VPN/Guided_Client_VPN_Troubleshooting/Unable_to_Connect_to_Client_VPN_from_Some_Devices#Windows_Error_628_and_Windows_Error_789 ... View more

 As of now we have configured full tunnel Branch Office to Head Office and in Branch Office all internet traffic coming from HO. In branches office location only allow specific cloud application access, How to configure and share the KB articles and required any routing. ... View more

- Network cloning The mentioned device settings are not preserved when cloning a network. For example we wanted to use the notes field for additional Information for our support crew. We cannot use "network notes" because network notes do not exists when a template is bound to network - Warm-Spare Worth a try and would keep most settings. Sadly not working for non-mx devices   Thanks for your suggestions ... View more

I  suggest you open a support case. ... View more

If you're looking to know more details on what is/isn't blocked why which specific rule etc, Meraki Support can help finding out. Meraki Support cannot resolve the issue itself. Hope this makes sense 🙂  ... View more

Turns out it was an issue with the DNS filtering service. Thanks for your assistance! ... View more

>but not the printer and the printer simply fails to print? #1 most likely cause - incorrect P configuration on the printer.  Check the subnet mask and default gateway on the printer. ... View more

We run 18.107.2 firmware so I believe we should be runing snort 3.  ... View more

When opening a support case as per @alemabrahao's advice, you may provide a HAR capture so our engineer can look into any potential errors there 🙂 ... View more

Hm.. You're right, @jimmyt234. Good catch. The setting applies to accessing the local status page on LAN devices that you are not directly connected it. E.g accessing the local status page on an Access Point that you are not currently connected to, but located somewhere else on your LAN. It does not reflect on the Remote Status Page on the Meraki MX. I apologise for the confusion. ... View more

Hi! The ping is sourced from the Meraki Cloud. Please refer to these articles:  https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Ping_Live_Tool#MR.2C_MV_Ping_Tool  https://documentation.meraki.com/MR/Monitoring_and_Reporting/Using_the_MR_Live_Tools#Ping  ... View more

You could test with Group Policy assignments for your AnyConnect users https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance#Group_Policies  ... View more

Good news everyone! This behaviour was fixed by firmware release 18.107.6 now. This solution was confirmed by @Ryan_Miles first and @jacobi50 later. Thanks for sharing! ... View more