We do for large orders. But if I want to buy a single device for testing, I typically just enroll via ABM to ADE.    Thanks, Zach ... View more

Thank you  ... View more

FS sells 10ft Twinax DAC cables for $18.   These will work - but please be aware that in the event of an issue support may require you to utilize OEM cables or they could refuse troubleshooting. Not sure if that is a common occurrence - somebody else may be able to chime in on that.   I've personally used third party cables with zero issue, and you avoid paying the Cisco tax. YMMV. ... View more

Obviously JHA/regulatory domain always takes precedence with any freqs.  Irrespective of 6GHz being available or not in JHA, the 9163E offers the longest runway when compared to 78 , 76, and 86. If and when the the local JHA's catches up, 6GHz would be available, beats a truck roll and another budgetary cycle in my book. ... View more

You could write this functionality yourself to save the performance data every 30 days with Python and the Meraki API and build up the dataset you need. https://developer.cisco.com/meraki/api-v1/ https://github.com/meraki/dashboard-api-python ... View more

A great idea! ... View more

You can set a schedule in the sensor alert profile.   ... View more

+1 for solid waste storm 🤣🤣 ... View more

If they are receiving a remove command it sounds like there is an issue with the scope. Have you opened a support ticket?  ... View more

Directamente en Meraki. He creado una política de grupo y se lo he asociado a los clientes, pero ahora no puede ver que clientes tiene asociado esta política desde templete, solo se puede ver si accedo directamente a cada una de las redes.  ... View more

Dear Organizer. Could you please give me this jacket as a souvenir? I really like this jacket and having it, I can show off to my colleagues and friends that I am a member of the Meraki Network community. I hope the organizer will consider it. Thank you and waiting for the organizer's response. ... View more

You should set it up to use Duo as your Idp instead of Entra in that case (that is what we use). ... View more

I have: Always on enabled Connect failure policy set to closed Captive portal remediation explicitly allowed in the VPN profile But captive portal is always not allowed... Users cannot reach the public hotspot website identification... The only way to fix my problem is to change the login failure policy to open... ... View more

Partially to thaak's point...   if scripting with something like Python is up your street, then using the Meraki Dashboard API allows more flexibility than Templates, but still allows you to perform config change at scale.   Of course the API allows a whole host of other things around monitoring and integrations etc. too - but requires some skills to make use of.   Worth noting though;   there is a halfway house - lots of ecosystem partner companies who develop software customised for a host of use cases, making use of the API in the background. https://developer.cisco.com/meraki/ ... View more

I'd reach out to your Meraki sales rep if above is the case to ensure the reseller put in the order. I've experienced this before and the reseller had forgotten to put the order in w/ Cisco. Meraki rep advised me that they had not, and I made some phone calls to the reseller that went as expected 🙂 ... View more

You can’t block Airplane Mode directly through the dashboard, unfortunately. One option could be restricting access to settings using a Mobile Device Management (MDM) solution, so users can’t toggle it on. Might not stop it completely, but it could limit when they can do it. ... View more

I have never done any additional configuration outside of installing the default options for the AnyConnect client so I don't think so.  How would I check if that is a setting? ... View more

Hey @KH,   Apologies for the delay. Took a while to attempt again, but we are getting:   "Unbinding Failed!' Selected Networks failed to unbind from template XXXX as some of the configurations could not be retained."   The actual unbind post request gets returned for 400 (Bad Request)   From my understanding with talking to support there is not a configuration retention issue preventing the unbinding, but a known sync issue with dashboard that is still unresolved for a number of networks. I'd personally prefer not to nix the whole thing and rebuild as that would require substantially more downtime and this is the FW at our main DC. But I'm also lazybones. 😉   I've got HAR captures, and screenshots of all of this in the case w/ support. Shoot me a PM and I can send you the case number if you wanted to take a look. ... View more

Thanks for following up! This is great info. ... View more

Thanks @AmyReyes and congrats to all the other winners! ... View more

Thank you for your prompt advice. ... View more

https://software.cisco.com/download/home/286330811/type/282364313/release/5.1.4.74 ... View more