Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About Slobs2
Slobs2
Getting noticed
Member since May 10, 2018
4 weeks ago
Community Record
38
Posts
22
Kudos
2
Solutions
Badges
05-31-2021
07:35 PM
Check for any group policy firewall rules;such as ones applied to VLANS.
... View more
05-31-2021
06:58 PM
Did you turn on VPN participation on the site-to-site VPN settings page for each VLAN you want to have access to over VPN? https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-Site_VPN_Settings
... View more
02-02-2021
06:48 PM
1 Kudo
Your best bet is to check syslog and search the source IP. In my logs there is l7_firewall logs that I look though. I’ve also done packet captures looking for reset flags and looked up the destinations country online.
... View more
02-02-2021
06:36 PM
1 Kudo
You could build them a custom dashboard using APIs. Here is a link to the SSID changes that can be done via API. https://developer.cisco.com/meraki/api/#!update-network-ssid
... View more
01-29-2021
10:22 AM
01-26-2021
11:52 AM
What's interesting is it looks at though there was an attempt to resolve this if you look at the release notes for firmware version 15.13.
... View more
01-17-2021
11:55 AM
2 Kudos
Yes. As a matter of fact I have an open ticket with Meraki. I am on firmware version 15.40 and unfortunately this is still an issue.
... View more
01-14-2021
07:17 AM
2 Kudos
VRRP is automatic with the MXs. Put one IP on the primary MX, then another on the secondary and then a third on the virtual IP. Once that is set, you can either make one WAN connection the primary and the other a failover or you can load balance by IP/Network. See here for more detail. https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferences
... View more
01-13-2021
11:06 AM
2 Kudos
Para ter perguntas personalizadas na página inicial, como usuário, provavelmente você precisará criar sua própria página ou comprar uma de um provedor. Você pode encontrar informações sobre como criar uma página inicial personalizada aqui:https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Configuring_a_Custom-Hosted_Splash_Page_to_Work_with_the_Meraki_Cloud
... View more
01-13-2021
09:10 AM
Você pode personalizar a página inicial da Meraki, seguindo o link aqui:https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Customizing_the_Splash_Page Existem também empresas que vendem splash pages personalizadas.
... View more
01-07-2021
11:17 AM
2 Kudos
Having users VPN in and RDP'ing to PC's is the only way I would allow that.
... View more
01-07-2021
11:12 AM
4 Kudos
I think for me it's cleanup up VLANS, auditing ports, checking spanning tree, etc. Not sure if I'll use the dashboard or API, but cleanup, auditing and documentation are high on my list for 2021.
... View more
12-29-2020
09:19 AM
I'm not sure it can install the agent automatically unless enrolled in DEP. Documentation says " Once configured, devices enrolling through DEP can automatically install the agent if within the specified scope." https://documentation.meraki.com/SM/Device_Enrollment/Systems_Manager_Agent_and_MDM_Profile_Enrollment#Auto-installing_the_macOS_Agent
... View more
12-29-2020
09:16 AM
You'll want both ports up, then edit the IP info for the switch (changing the IP, VLAN, etc accordingly), and then you should be able to disable the old port.
... View more
12-29-2020
07:23 AM
How did you add them to the dashboard? At minimum you need the profile installed. If they are in DEP this happens during setup, then the agent can be installed. If they are not in DEP, then this would be a manual process to get the profile installed.
... View more
12-28-2020
05:59 PM
Download the Meraki SM app. Any apps that are scoped to the device will be shown there and can be downloaded.
... View more
12-17-2020
11:37 AM
5 Kudos
I know this is old school tech but: On the fifth day of Switchmas spanning tree gave to me, five token rings!
... View more
10-04-2020
09:00 AM
If you're using tags, ensure your tags have the correct VLAN assignment.
... View more
08-02-2020
01:38 PM
Hi @UCcert , I don't think I understand your response. This switch is between the ISP and the MX, so its outside of the LAN. There is no DHCP so a static address would be needed, that would need to be a public address. I'm curious about the security implications of having a switch management IP as a public IP not private.
... View more
07-28-2020
04:32 PM
Hello all, I have a question. I am using an MS220-8 as a distribution switch from my ISP to two MX250's in an HA pair. Should the management IP of this switch come from behind the MX or can a public IP be used instead. Is it secure/safe to do so? Thank you!
... View more
03-05-2020
04:24 PM
So I am noticing that I only am seeing the switch the AP is plugged into, not any downstream switches or MX.
... View more
02-11-2020
08:06 PM
So let’s say I have an AP that’s expiring in 6 months. I then buy a one year license and place it on that AP to extend the license. What happens if I buy a new AP? Is the partial and new license gone? Do I have to buy a new license all together?
... View more
01-19-2020
01:16 PM
I’m trying to setup sentry on Windows 10 clients for VPN. I created the profile setting it to device authentication. When I click on the VPN in Windows it asked for credentials. Is there something I’m missing?
... View more
Labels:
- Labels:
-
Sentry
01-19-2020
08:02 AM
I am having the same issue. I tried @SoCalRacer 's suggestion and it did not work. DId you find a solution?
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 830 | 02-02-2021 06:36 PM | |
| 1876 | 01-13-2021 11:06 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 5 | 11931 | |
| 4 | 7411 | |
| 2 | 3941 | |
| 2 | 2232 | |
| 2 | 735 |
