For completeness in case anyone else is suffering the same issue as us, well, I logged a ticket with support, turns out this issue was introduced in an earlier version of firmware, 30.5 I think, is resolved in 30.7.    The issue is called 'FastCGI unresponsive'.  Yep, good description that, dunno how I didn't seen that in the release notes and guess that was related that to my problem and apply the firmware update sooner (despite worried about radius authentication issues in 30.7.....)...   Note to self, any issue log with support to get the full picture         ... View more

We are an important organisation and have hundreds of MR46 in production. I confirm this random issue, as many others in this post. Some APs are negotiating at 100 Mbps FastEthernet, not Gigabit. After some times, they are suddenly negotiating back to Gigabit. We have Meraki switches only. When we run the cable test from the console, it always finished without any error.   We have also this issue in a new buildings, with new wiring that has been checked with a professional network tester.  The UTP cable connections is not shielded, so I'm wondering if shielded S/FTP cable is adviced to help with this issue.   If it's not a wiring issue, it should be adressed and analyzed by Cisco. They are too sensitive for normal prod conditions. ... View more

"new" known issue :    AMI not sending RADIUS traffic ... View more

Sounds similar to our issue we've been having throughout the year.  We first tried enabling QOS in SSID traffic shaping with default rules (which prioritize voice) per Meraki Support.  That didn't work.  The issue was our firewall (and typically is in most cases).  We have a Fortigate and by default it has a UDP Flood protect enabled under IPv4 DoS Policy.  We had to adjust the threshold to a much larger amount.  No wifi calling issues after.  The other issue which really can't be resolved is forcing wifi calling as a priority on the devices.  On Android you can set priority, not on iPhone.  ... View more

This. Have an MR76 and just ordered a new one for this exact same scenario. I'll concede that the last two times I had a WAP in repeater mode it was the cabling, but not this time. Something to note is that if I forced it to full speed rather than Auto negotiate, it wouldn't connect at all, further enforcing the belief that something was faulty ... View more

I am now running MR 29.6.1 on 20 APs, and I have no issues. Speedtest.net from my laptop gives me 500/300 Mbps. 2 active SSIDs. ... View more

No client balancing enabled. ... View more

Scratch that.... this morning just randomly roamed with fixed channel set.  I give up, just going ethernet until I can test with M2.  The disconnection reason in logs was "client not responding".  My device had perfect connection and I was working normally.  ... View more

Hey Tim,   Well first off, my main gripe is that this simple functionality should be build into Meraki dashboard.  Sadly, this is another example of TAC can do it but admins cannot (like also see switch/AP uptime).  We had a firmware issue with AP slowness over time and rebooting AP's in each network was the only solution.  Finally, a firmware update fixed the issue.  That was really the only time we needed to do what your app does.  Tough to determine a price tag.  ... View more

We reported the problem to HP also but have heard nothing back as expected.  So far the best band-aid seems to be the Lenovo driver mentioned above.  It still does not eliminate the problem but reduces it quite a lot. ... View more

I haven't installed the beta firmwares.  It is possible this helps, but we are also experiencing the issue with security appliances with built-in wireless.  Unsure if the beta MX firmwares include the same updates. ... View more

Hi everyone! It was hectic, did not get a chance to say thanks for sharing info and experiences here! We upgraded to 29.2 beta, and we made a few other small adjustments over a period of time. It's a dynamic high density co-working space, so it's hard to gage completely, but I think it contributed to a better user experience all round, and we had no new big issues arise.   Cheers,   Tim ... View more