About RestaurantGuy

RestaurantGuy · ‎07-01-2021

Go to Security & SD-WAN then under Configure click DHCP. The DHCP Options should be listed under each DHCP scope.

RestaurantGuy · ‎06-30-2021

I have a new Avatar! My puppy is looking a bit too serious, but everything is serious to her when it comes to another pair of socks!

RestaurantGuy · ‎06-15-2021

I don't see the option of controlling the secondary WAN usage of the VPN. I thought it only created a connection to the active WAN interface?

RestaurantGuy · ‎06-15-2021

Sounds like I need to go and add the ability to send it's telemetry out through the Ethernet port to the wish list! Thanks for the clarification.

RestaurantGuy · ‎06-15-2021

We have set up an MG21E as a failover connection for a restaurant. Works very well and fails over fast and none of the issues we had using the USB devices connected directly to the MX. Our issue is that the MG seems to be using about .13Mbs of data at a fairly constant rate when we are not in a fail over state. With one device this is not a huge issue, but we have a shared data plan and are planning to add them to all of our locations, meaning that data usage will become an issue. Does anyone know of a way to limit the amount of data usage or better manage data while not being the primary connection?

RestaurantGuy · ‎06-07-2021

I should have looked closer, but still works.

RestaurantGuy · ‎06-07-2021

Currently looking at one with 7 and one with 3, checking a few others that may have more. Currently seeing as high as 9 and the link is still good. Correct me if I am wrong though, the number of clients on that screen is just the number of high usage clients, not a total number of clients?

RestaurantGuy · ‎06-07-2021

I can select it. I get a list to select Past 2 Hours, day, week, month or cancel.

RestaurantGuy · ‎06-07-2021

Ah, I have had that issue and usually build a rule in my email client to move them off to a separate folder.

RestaurantGuy · ‎06-07-2021

I believe you are correct. If you are using the Default Recipients then all alerts go to those recipients and the Additional Recipients on a per alert setting is simply in addition to the Default Recipients. You'll probably want to add that to the Wish page unless you want to set each Alert manually.

RestaurantGuy · ‎06-07-2021

I've ran a Watchguard XTM-26 to an MX device for several years. The XTM is now likely a model T15. Several tech notes out there on how to set it up. The WG devices come with a license when purchased but the device does not shut down when it expires, so you can keep using it. Makes a decent VPN endpoint, although I'd likely go Z3 with a long license assuming this is for a small office, partner company or individual.

RestaurantGuy · ‎06-04-2021

To be upfront, I have not tried this. But based on how the devices work and how the hardware usually works in regards to SFP adapters, you have to match the SFP/SFP+ to the port it is installed in. That said, you should be able to cable the fiber between the two and run at 1GB speeds, the lowest common denominator.

RestaurantGuy · ‎06-04-2021

I used it no long after it came out. It was actually one of my biggest requests from way back. It works okay, but I recall receiving an email that they were making changes to it that might affect my use of the tool. There is also a track record of beta capabilities getting reset when moved into production, so I would be very cautious about putting it into production. Sure would be nice if they had beta items documented for expected release! So far I am only using it in very limited circumstances.

RestaurantGuy

Community Record

Badges

Re: DHCP option for TFTP server

Re: Update your avatar, win Meraki swag!

Re: MG21E Data Usage

Re: MG21E Data Usage

MG21E Data Usage

Re: Android app performance issues

Re: Android app performance issues

Re: Android app performance issues

Re: A new user registers via splash page...

Re: A new user registers via splash page...

Re: Non Meraki Peer Recommendation

Re: Is it possible to link devices from SFP to SFP+ ports?

Re: Policy Objects - Beta Concern or No?

Re: Update your avatar, win Meraki swag!

Re: Policy Objects - Beta Concern or No?

Re: MG21E Data Usage

MG21E Data Usage

Re: Non Meraki Peer Recommendation