Why don't you create a separate VLAN for this SSID, when you use NAT the client connection will use the AP IP to access the network. In my opinion, the best option is to use a different VLAN for this case. https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points
... View more
Why do you want to set the channels manually? It's recommend perform a site survey to analyze you network. https://documentation.meraki.com/MR/Radio_Settings/Manual_Channel_Selection%2C_Transmit_Power_Adjustment%2C_and_Antenna_Configuration You can not remove the RF profile, but you can create a custom RF profile.
... View more
Take a look on the documentation. https://documentation.meraki.com/MR/Encryption_and_Authentication/Meraki_Local_Authentication_-_MR_802.1X
... View more
By default, all hubs establish VPN among themselves according to the documentation, that is, this is how Meraki works. Have you confirmed that these summarized routes are configured to advertise on the VPN?
... View more
Perhaps you could use webhooks. But I don't know if you will get everything you want. https://documentation.meraki.com/General_Administration/Other_Topics/Webhooks https://developer.cisco.com/meraki/webhooks/#!introduction/example-integrations
... View more
I believe that in your case the best option is to use a Radius server integrated with your AD. https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_with_WPA2-Enterprise
... View more
It's look like a network looping issue. Way are you connecting the Meraki switch on a access port instead a trunk port? I suggest you to review the connections between the switches.
... View more
