Warning: Care should be taken when configuring SSID block list policies as these policies will apply to SSIDs seen on the LAN as well as off of the LAN from neighboring WiFi deployments. Containment can have legal implications when launched against neighbor networks, and it may harm your own network by increasing channel utilization and potential disrupt clients connecting to your APs. Ensure that the rogue device is within your network and poses a security risk before you launch the containment.  Review the section Overview of Air Marshal Containment to understand how the APs may block the configured SSIDs.     ... View more

In fact this is a resource that should be used if in fact there is someone who wants to do some kind of spoofing or DDOS, otherwise you can respond legally. ... View more

A Rogue Ssid is all Ssid that does not belong to its Wireless infrastructure but does not mean it is a malicious SSID, for example, a neighboring company is considered a Rogue Ssid, I don't know if you understand. Follow the documentation to complement.   https://documentation.meraki.com/MR/Monitoring_and_Reporting/Air_Marshal ... View more

I assume the DHCP mode on the SSID is set to bridge.   In that case, you have to configure the VLAN Tag in the SSID for the VLAN you want.   https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points           ... View more

You can try enabling 802.11w as @ww suggested, But in my opinion, It does not make sense. I've been working with Meraki wireless for a long, and I have never enabled 802.11w to solve this kind of issue. ... View more

Have you tried updating Android?  ... View more

By the way, do you have any firewall rules applied to this SSID? ... View more

Take a look at the documentation:   https://documentation.meraki.com/SM/Device_Enrollment/SM_Enrollment_Authentication   https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Certificate-based_Wi-Fi_authentication_with_Systems_Manager_and_Meraki_APs   I recommend you ask your Meraki sales representative consultant. ... View more

What type of authentication are you using? Have you opened a support case? ... View more

Why don't you create a separate VLAN for this SSID, when you use NAT the client connection will use the AP IP to access the network. In my opinion, the best option is to use a different VLAN for this case.     https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points ... View more

And how about your firewall?  I have never heard of or experienced a slow network when the SSID is configured for NAT. ... View more

Do you have any traffic shaping rule configured for this SSID? ... View more

You need to open a support case. ... View more

Check it out.   https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/meraki-solutions.html ... View more

If you changed the password they need to edit the connexion and put the new password. ... View more

Why do you want to set the channels manually?  It's recommend perform a site survey to analyze you network.   https://documentation.meraki.com/MR/Radio_Settings/Manual_Channel_Selection%2C_Transmit_Power_Adjustment%2C_and_Antenna_Configuration   You can not remove the RF profile, but you can create a custom RF profile.   ... View more

Take a look on the documentation.   https://documentation.meraki.com/MR/Encryption_and_Authentication/Meraki_Local_Authentication_-_MR_802.1X ... View more

I believe that it's not a Meraki issue. What type authentication are you using? WPA2 enterprise (802.1x)? ... View more

By default, all hubs establish VPN among themselves according to the documentation, that is, this is how Meraki works. Have you confirmed that these summarized routes are configured to advertise on the VPN? ... View more

You can install syslog on a Linux server.   https://linuxhint.com/set-up-syslog-centos-8/ ... View more

This is because there was no event detected. Wait a little longer and surely if something is detected it will be displayed on the page. ... View more

Perhaps you could use webhooks. But I don't know if you will get everything you want.   https://documentation.meraki.com/General_Administration/Other_Topics/Webhooks https://developer.cisco.com/meraki/webhooks/#!introduction/example-integrations ... View more

Take a look at this information:         ... View more

Have you checked if there is any Hit count?     ... View more

As far as I know you need to ask Meraki support to enable it for you:     ... View more