Meraki

alemabrahao · ‎Sep 12 2022

Hi @ishh, Well, I have a client with 700+ branches, and the MXes are working fine. It's a little strange.

alemabrahao · ‎Sep 8 2022

Hello @merman01, I think the answer to your question Is yes, look this: https://community.meraki.com/t5/Security-SD-WAN/Threat-Protection-with-site-to-site-VPN/td-p/10213 But you can confirm It, opening a case on Meraki support.

alemabrahao · ‎Sep 8 2022

I got It, well, you don't need a specific configuration, just a trunk port like this:

alemabrahao · ‎Sep 6 2022

I didn't understand, what is an open switch port? What's are your switch model?

alemabrahao · ‎Sep 6 2022

Hi @Porcap Yes, SSID in bridge mode, but you have to configure VLAN tagging on SSID, and the port that the APs are connected should have to be configured as a trunk.

alemabrahao · ‎Sep 6 2022

Same here.

alemabrahao · ‎Sep 5 2022

@FKastro, Is it possible to change it to WPA2 only and disable 802.11w? Just to test. You can also create a new SSID to test It.

alemabrahao · ‎Sep 5 2022

I got It, can you share your RF Profile configuration? What type of authentication are you using?

alemabrahao · ‎Sep 5 2022

@FKastro, have you facing the same issue using 5Ghz band?

alemabrahao · ‎Sep 5 2022

@rwiesmann I had the same problem months ago, but the Meraki support can't unclain the device, the best way is ask the saller to unclain It for you.

alemabrahao · ‎Sep 5 2022

Hi, The Client VPN should be work on both links, Are you using L2TP connection or AnyConnect? Have you checked the logs on Event Viewer from Windows?

alemabrahao · ‎Sep 5 2022

I agree with you @BlakeRichardson

alemabrahao · ‎Sep 2 2022

Hi @SA1 I think this link can be useful: https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance/Authentication

alemabrahao · ‎Sep 2 2022

Sure, https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping

alemabrahao · ‎Sep 2 2022

Hi @michaelpatton, The Global bandwidth limits are configured? The NVR and Cameras are communicating on the Local network or are you using the port forwarding to communicate cameras with the NVR? It's not clear to me.

alemabrahao · ‎Sep 2 2022

Hi @Gateway-SF , Try to create a Walled Garden and than insert these URLs: accounts.google.com *.googleusercontent.com apis.google.com *.gstatic.com *.googleapis.com

alemabrahao · ‎Sep 2 2022

Hi @ishh, Have you tried to create an SD-WAN policy and Traffic shaping rule? Take a look on this link: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/Meraki_SD-WAN#NAT_Traversal_2

alemabrahao · ‎Sep 1 2022

Also, check this article https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Configuring_Active_Directory_with_MX_Security_Appliances and confirm if all configurations needed have been done.

alemabrahao · ‎Sep 1 2022

@KBLatColonial look at this article: https://documentation.meraki.com/MR/Encryption_and_Authentication/External_Identity_Sources

alemabrahao · ‎Sep 1 2022

Well unfortunately It's not possible, you need a Radius server to use a specific group on Meraki SSID. On WLC AireOS you can set a specific group when LDAP is used but on Meraki no way.

alemabrahao · ‎Sep 1 2022

I'm not sure, but I think AVB is supported just on Cisco Catalyst 9500, 9300, 3850, and 3650 Series switches.

alemabrahao · ‎Sep 1 2022

Do you have a radius server installed? If yes, you can create a policy and specify what group can log in on a specific Wlan. https://blog.matrixpost.net/set-up-a-radius-server-on-windows-server-2019-for-802-1x-wireless-connections/

alemabrahao · ‎Sep 1 2022

On Umbrella you can use SSL decryption. On Meraki, the HTTPS Inspection feature was announced, and It's is still in development and in beta.

alemabrahao · ‎Sep 1 2022

Hi @Rhys80 , could you please share the configuration of your group policy and integration with AD?

alemabrahao · ‎Sep 1 2022

Hola, en ambos casos las licencias son válidas a partir de la fecha de disponibilidad. Por ejemplo, si recibí las licencias en abril, pero solo las agregué al tablero en agosto, el plazo comienza en abril.

About alemabrahao

alemabrahao

Alessandro Abrahao

Community Record

Badges