Hi @sbehan18.,   Yes, technically It is this.   https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferences#Load_Balancing ... View more

Well, I'm not sure. If it's just for a Lab I think you can try. ... View more

Does the switch core has a route for this network? Do you have a topology? ... View more

Have you tried to block the source IP or the Country? ... View more

In time, does your client use any CMX functionality in particular? ... View more

Well, I know that it is possible to use Cisco ISE with Meraki APs without problems, But I'm not sure about CMX, because Meraki has a Location Analytics integrated.   https://community.cisco.com/t5/security-knowledge-base/how-to-integrate-meraki-networks-with-ise/ta-p/3618650 ... View more

I took a look on my dashboard, and It's look fine to me:   Can you share your license expiration data? ... View more

@NWNSM1,   Technically, if you are enabling schedule to disable the port, the POE will be disabled too. ... View more

Hi @Justin1104,    The PDL maintain a single shared expiration date or various expiration dates across devices, networks, or organizations. For customers who have multiple expiration dates across devices and want to have a shared expiration date, they can purchase one-day license SKUs for their products. If there are two different expiration dates, the license expiration date can only be "trued-up" to equal to or later than the further expiration date. For example, if a customer has two devices, one with an expiration date of January 1, 2020, and another with an expiration date of January 31, 2020, the customer can purchase (30) one-day SKUs and apply it to the first device. Customers cannot split license time and apply it across multiple devices. For example, if a customer has an additional one-year license and 12 devices, they can only apply it to a single device. They cannot break it apart and apply one month across 12 devices. ... View more

Hi @erhanevgin, have you tried a factory reset?  A while ago I had the same problem, and to solve it, it was necessary to reduce the number of characters in the network name. Support explained why, but I don't remember exactly why. ... View more

It doesn't matter, you can use any VLAN that you want. ... View more

Air Marshall is the same as the Rouge detector in AireOS technology. So we can assume that from the datasheet specifications, the Meraki APs do not support clean air.   In this link, you can read about the clean air technology:   https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_010000010.html ... View more

Hi @ishh,   Well, I have a client with 700+ branches, and the MXes are working fine. It's a little strange.  ... View more

Hello @merman01,     I think the answer to your question Is yes, look this:   https://community.meraki.com/t5/Security-SD-WAN/Threat-Protection-with-site-to-site-VPN/td-p/10213   But you can confirm It, opening a case on Meraki support. ... View more

I got It, well, you don't need a specific configuration, just a trunk port like this:     ... View more

I didn't understand, what is an open switch port? What's are your switch model? ... View more

Hi @Porcap Yes, SSID in bridge mode, but you have to configure VLAN tagging on SSID, and the port that the APs are connected should have to be configured as a trunk.   ... View more

Same here. ... View more

@FKastro,    Is it possible to change it to WPA2 only and disable 802.11w? Just to test. You can also create a new SSID to test It. ... View more

I got It, can you share your RF Profile configuration? What type of authentication are you using? ... View more

@FKastro, have you facing the same issue using 5Ghz band? ... View more

@rwiesmann  I had the same problem months ago, but the Meraki support can't unclain the device, the best way is ask the saller to unclain It for you. ... View more

Hi,   The Client VPN should be work on both links, Are you using L2TP connection or AnyConnect? Have you checked the logs on Event Viewer from Windows? ... View more