Hi,   Following is similar conversation for your reference   https://community.meraki.com/t5/Security-SD-WAN/3-ISP-on-Meraki-MX84/m-p/72164 ... View more

Welcome @Hossam_Marzouk  ... View more

Will turning this off interfere with iPads that use apple school manager logins? ... View more

@Richard_W wrote: That would be because you do not have the Advance License, you must have the Enterprise License. Indeed, and just in case... if it's not there it won't block anything :). ... View more

Over the last couple of months or so, I've noticed our MV21 cameras seem to take more time to display on our video wall compared to in the past. MV12s always seem to load a lot faster.   The MV21s will start black and then load after a short amount of time. Firmware is MV 4.0   Anyone experience anything similar to this? ... View more

It's not free. The prices is really at low end if you use any cloud based provided.  Spin up a trial with SplashAccess or Twilio. Check the SMS Splash page option on this document for more details.  https://documentation.meraki.com/MR/MR_Splash_Page/Splash_Page_Details_for_Meraki_MR ... View more

They are both the average percentage lost over the sample time.  For the 2 hour graph there is a shorter sample time so as packet loss is usually intermittent tiny periods of loss, you end up with longer sample times showing less average loss.   i.e. 100% loss for 1 second If the 2 hour graph has a 2s sample time it will show 50% loss If the 1 day graph has a 10s sample time it will show 10% loss ... View more

you can play with bluetooth settings here on dashboard. Wireless >>> Configure >>> Bluetooth Settings.    Great documentation explaining the details about these settings. https://documentation.meraki.com/MR/Bluetooth/Bluetooth_Low_Energy_(BLE)#Bluetooth_Advertising   ... View more

Thank you,  the APs are no longer receiving that notification, and there were no changes made, so it was most likely the same with what happened to you.   ... View more

@GreenMan is correct here.   This is a walk through guide. https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_with_WPA2-Enterprise  ... View more

@Mahi_Meraki_guy solution is the easy one. ... View more

I figured out what the server address is for my Cisco Webex Calling cloud registered phone. Press the settings button on the phone. Press the button for phone information (6 on my 8845 phone) Scroll down and you will see the active server hostname (cms-vip-a-03-internal.na-prod1.huron-dev.com on my phone) Enter this as the hostname in VOIP Health. Be patient, it took a little while for it start showing up on the VOIP Health screen.   ... View more

had to manually install the agent to trigger Meraki Management profile to begat others… ... View more

Seems to be a bug from Apple side. I did talk to Apple tech about it and they did acknowledge the issue. Resetting network connection fixes the issue but current apple firmware are still vulnerable to it so it might come back again until Apple provide a fix. ... View more

If there's two separate corporations with two separate authentication methods, why do you have them sharing the same vlan? I don't understand that design thinking.   20 questions time:   Are these SSIDs all broadcast on the same APs? Do you get the same result when associated with every AP?   Does the speed change at all, or is it always like this regardless of client mix? What minimum bitrates are you using?   Do you have group policies applied to some devices with bandwidth restrictions? ... View more

So why would Meraki ignore IoT, and all the TVs and Sound systems that use BLE, as well as integrating with payment machines. They must have been shouted down by the barking dog. ... View more