No. There can be only two active WAN connections for any MX. Third WAN could be only be cellular for failover, when both the WAN links are down.  ... View more

In addition, you can attend Meraki webinar to get latest and greatest information. Next one is coming up on 19th June. https://meraki.cisco.com/webinars/introduction-to-sd-wan-with-meraki-mx/   There are several VOD sessions also available on the webinar portal https://meraki.cisco.com/webinars/   ... View more

It's not free. The prices is really at low end if you use any cloud based provided.  Spin up a trial with SplashAccess or Twilio. Check the SMS Splash page option on this document for more details.  https://documentation.meraki.com/MR/MR_Splash_Page/Splash_Page_Details_for_Meraki_MR ... View more

Security SD- WAN >> Content filtering >> Whitelisted URL patterns >> use url  INGP.MONERIS.COM here. Security SD-WAN  >> Configure >>  Firewall. >>> Create L3 rule to allow communication on port 2601. ( By default all the ports are allowed. No need to do anything if there is no rules created here ) ... View more

Use Meraki Insight for better understanding you WAN health.  It will also be able to help you with VOIP health. Gives meaningful data in just few clicks and provides you the pain points in the data path.  ... View more

So by default we get ping google dns (8.8.8.8) to build up loss and latency graphs on dashboard. Please configure Cisco Umbrella DNS IP as reference and see if you see same delay and loss. Cisco Umbrella IP addresses. 208.67.222.222. 208.67.220.220 ... View more

you can play with bluetooth settings here on dashboard. Wireless >>> Configure >>> Bluetooth Settings.    Great documentation explaining the details about these settings. https://documentation.meraki.com/MR/Bluetooth/Bluetooth_Low_Energy_(BLE)#Bluetooth_Advertising   ... View more

I would suggest to create an aggressive rule for VOIP traffic. This will prioritize your VOIP traffic all the time.      ... View more

This means Meraki cloud is having issues connecting to your Device. Mostly it is due to the ISP or customer network issue. Very rarely it could be due to some outage at Meraki side also. Good part is that your user traffic never gets impacted due to this so your MR will still be serving clients with full capabilities.  ... View more

if your concern is just that the screen timeouts. You may use any chrome screen refresh plugin. These plugins refreshes the screen at fixed interval which stops the session from timing out.  ... View more

Meraki uses technology called HTTP live streaming. It cuts down the requirement to have an additional piece of software to view the video but also introduces this small buffering delay. Due to how HLS functions, there is a small buffering period which leads to a slight delay in the video stream. For local direct streams, this delay can be 5-10 seconds.  For more info check this documentation. https://documentation.meraki.com/MV/Viewing_Video/Video_Streaming ... View more

You should probably unenroll the device from Meraki MDM prior to sending it for repair. If the logic board was replaced at the Apple Store, and although the serial number stayed the same , other hardware identifiers like UUID etc might get changed. In this current situation, you may try to reformat.   If that does not work, the solution is to Delete (Remove From Network) the device from the list of Devices in Meraki Systems Manager. Then try to reenroll the device.   ... View more

If you want the end users to still go ahead and modify the passcode setting on their devices, You can select this option "Allow modification of passcode settings". ... View more

Seems to be a bug from Apple side. I did talk to Apple tech about it and they did acknowledge the issue. Resetting network connection fixes the issue but current apple firmware are still vulnerable to it so it might come back again until Apple provide a fix. ... View more

As mentioned by  BrechtSchamp our Bluetooth is just for scanning and gathering details of users around the AP. This is to provide location analytics. We do not transfer any actual user data using the bluetooth interface.   ... View more

Follow the path for packets coming in both the SSID. Find the delta and you should find who is doing the policing on the other SSID.   UE <<>>> AP <<<>>> Switch <<<<>>>> FW <<<<ISP>>>>   Best practices.  1. Make sure you are using same device and same app to test. 2. Make sure your Device is on same AP while doing the test. 3. Check if Radius is playing a role here. ... View more