Meraki does not sell direct or really have sales managers.  They are just sales reps and subject matter experts.  They sell through Cisco channel partners.  So pick your favorite Cisco partner and have them handle it.   ... View more

Have you tried calling support and asking nicely?  I am pretty sure they have authority to do something like that without too much trouble.  Especially, if you can show them proof of order placed. ... View more

You should know auto <> 100-Full is a no no. They might actually have hard coded 100-Full and you leaving the MX at Auto causes a mismatch: https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/17053-46.html#auto_neg_valid ... View more

I would get that router fixed or replaced though.  100-half is not cool. ... View more

I think you can.  Log into the local web interface on the MX to check.  You should see something like:   ... View more

You could send events to a syslog server and trigger an alert from events when the client connects or disconnects. https://papertrailapp.com/ is a good, free syslog server to do this with.     ... View more

Are you trying/Intending to run two different DHCP servers?  Why?   It sounds like maybe you saw an error in the event log about DHCP server conflict and one was shut down?   Screenshot?     ... View more

I have a customer with a few users that travel to China a few times a year and use client VPN back to the US.  They have stated that it works fine for them.   Ultimately though, I don't think you can guarantee much and it is subject to vary from region to region even with China.   I'll be curious to hear if others have used Meraki auto VPN from China and if it works ok. ... View more

Now I get it ;). I guess you want to try to get this Administrator account to always use a group policy that ignores content filtering then.     I am not really sure, but I'll bet support could help or maybe this does? https://documentation.meraki.com/MX-Z/Group_Policies_and_Blacklisting/Integrating_Active_Directory_with_Group_Policies     ... View more

Sorry, I may not understand completely.  What do you mean by, "..Meraki using the account Administrator to authenticate."?  Are you talking about the Systems Manager client on workstations?     ... View more

You can whitelist users and also assign a group policy to users that ignores content filtering.  Is that what you mean? ... View more

@khurram wrote: not appearing in change log i already have checked that. @BrandonS wrote: Organization > change log     What is not appearing?  The user or the IP address?  The user and the changes should be there (if they were made).  The IP address is only user the user profile so you would have to use their credentials to see it.   ... View more

For the source IP, I have only seen it under 'My Profile' when you click your email on the top right.  I am not sure how you could find the source IP of another user without their credentials though. ... View more

Organization > change log   ... View more

Specifically from the link you shared:   Repeaters will also serve SSIDs trunked on different VLANs. However, only one SSID & associated VLAN may be configured to bridge wired clients across a mesh link on a repeater access point's Ethernet port. A mixture of wired clients and Cisco Meraki access points attached to one MR repeater interface is not a supported deployment configuration. This is due to the auto detection mechanisms that Cisco Meraki access points use to infer when they should function as a gateway or a repeater. ... View more

You can choose only one VLAN to bridge, unfortunately.  So, you cannot use MR as a 'standard' bridge.    Not sure why this is, but I have had to revert to other products for bridges like this. ... View more

Negative.  They need to be the same model. ... View more

I don't think you will find such data for WPA2. However, if you use splash logins or Google, Facebook you should see a new option: wireless > login attempts that will show failed and successful logins.     ... View more

Since you mentioned having 200+ switches you may be interested to know about this if you don't already: https://documentation.meraki.com/MS/Other_Topics/Staged_Upgrades_for_Meraki_Switches   It can take the pain and risk away from needing to update all switches at once. ... View more

Maybe the guest ambassador feature? https://meraki.cisco.com/blog/2013/05/guest-ambassadors-providing-simple-and-secure-guest-access/ ... View more

Well, technically SSID's themselves don't communicate with each other, but you could have more than one SSID in the same VLAN and subnet or you can route between them via a layer 3 device.   ... View more

I wonder if this has to do with your local network overlapping the guest network Meraki uses (10.0.0.0/8)?     ... View more

I don't think you need to specify ICMP, but I could be wrong and it shouldn't hurt.   I would try just rebooting the machine you are testing from or maybe delete the wireless connection and connect again.  Some changes in Meraki like this can't take effect immediately because active network flows won't be updated.  ... View more

It should be blocking as you expect.   I suspect that there may be a flaw in your testing.  Did you set the deny recently while trying to solve this?  If so it may not have taken effect on current network flows yet.   Is it possible the machine you are testing from is also connected to wired LAN while connected to the guest wireless?     ... View more