Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Aztec_Ninja
Aztec_Ninja
Getting noticed
Member since Dec 12, 2018
Oct 11 2023
Community Record
26
Posts
5
Kudos
1
Solution
Badges
Oct 11 2023
1:40 PM
The issue was resolved by removing the Block LAN on the wireless firewall and traffic shaping. The double gateways really through me off.
... View more
Oct 11 2023
1:26 PM
We are using the MX and MR on Internal network, with a ISP Router at the edge.
... View more
Oct 11 2023
1:26 PM
I am taking over network so not 100% sure why, maybe they were future proofing. I am going to test with a new SSID to confirm if it behaves the same way.
... View more
Oct 11 2023
10:52 AM
I arrived at site today with an MX68 and MR33. There is an issue with a SSID which is assigning the endpoints two Gateways. One Gateway IP is valid and there is erroneous. Traffic is flowing correctly to the Internet but services on the LAN like printing are not. The SSID in question was setup with Layer 3 Roaming and VLAN Tagging. The tag is set to the correct VLAN with DHCP enabled. However there is only a single MR. There are no errors from the MX or AP, routing table looks good. Firmware: MX 18.107.2 MR 29.7.1 Any ideas?
... View more
Oct 10 2023
7:46 AM
We have several small sites with Roaming users and we have several SSIDs with PSK only. How are you securing sites without a Radius Server? The issue is users sometimes share SSID info via iPhone/Android. Also, we dont want to get flooded with Access requests to use Meraki Auth. Could we use Auzre AD (multiple Tenants)?
... View more
Sep 18 2023
7:53 PM
What is the proper method of connecting two MS Switch stacks? We have 1 SFP+ port on each of the stacks available, would using using aggregated ethernet ports be sufficient?
... View more
Sep 6 2023
12:04 PM
Ah I now see my mistake. Static route is working, thank you for the help kind sir! Virtual pint on me!!
... View more
Sep 6 2023
11:29 AM
I configured the common VLAN with a uniquire Gateway IP will save no issues. The issue is now when I add the static Route, I use the subnet of the VLAN and next Hop IP, I get the following message: Static lan route subnets cannot be contained by (or be equal to) a VLAN subnet. Which subnet should I use when adding the static route to MX 2? MX 2 is where I am adding the common VLAN. In your example I am using the VLAN 999 subnet 172.16.1.0/30 next hop 172.16.1.1 On MX1 I just added static route 172.16.1.0/30 next hop 172.16.1.2, this saved without error.
... View more
Sep 6 2023
10:41 AM
To confirm the static route would live on the MX configured without the VLAN I need to reach, correct? Ill give this a shot, thanks again.
... View more
Sep 6 2023
9:12 AM
Hello We have TWO MXs configured with multiple VLANs. I need to a device to access device across the MXs. Is this possible without adding the VLAN to each MX? Sorry if this is confusing or I am not explaining properly, but I am attaching a diagram to help. Thank you for your help.
... View more
Aug 15 2023
7:32 AM
We have two MS 225's that are being used in production and we want to setup a stack with the Meraki Stacking cables. Has anyone had any experience with this and do you know if we will have to reconfigure all the switches after setting up the stack? I hope to have as little downtime as possible as I know we have to power off the switches before connecting the stack cables, and setting up the stack. But not sure if we will have to reconfigure all of the switch ports or not.
... View more
Dec 5 2022
12:51 PM
Just got a server error - Server error The server encountered an error and could not complete your request. A message has been sent to our engineering and support teams to notify us of the problem, and we will fix it as soon as possible. The Cisco Meraki Dashboard is temporarily unavailable, but rest assured your Meraki equipment is still running and network operation has not been interrupted.
... View more
Dec 5 2022
12:50 PM
https://status.meraki.net/ - indicates no issues, but something is funny.
... View more
Dec 5 2022
12:48 PM
Is the Meraki Dashboard and App down? We are unable to access from any location/site/service, etc...
... View more
Labels:
- Labels:
-
Administrators
Feb 23 2022
8:27 AM
My ticket was closed by meraki support. Was told they are not security consultants. How did you track this down to communicating with Meraki website?
... View more
Feb 17 2022
8:45 AM
Any update from Meraki support? I have found this to be internal IDS Traffic alerts. Seems like an IDS false positive. Our IDS settings are set to prevention and security, curious if you're using the same?
... View more
Jan 29 2022
12:35 AM
After updating the firmware on our MX to 16.15 we started recieving IDS alerts - SERVER-OTHER Exim unauthenticated remote code execution attempt. Sophos has a similar problem but released a patch. Anyone else expencing the same issue with their MX?
... View more
Jan 27 2022
10:31 AM
It can def be done. If using the integrated LTE Modem you have to activate the MX before by connecting it to the internet via Internet 1 or Internet 2 ports. ONce this is done you can use Cellular as your primary Internet source.
... View more
Jan 27 2022
10:29 AM
You can find logs here > Network-wide > Monitor > Event Log > Filter by All-Non Meraki VPN /Client VPN
... View more
Jan 27 2022
10:26 AM
A bit little here but you could use the following script to help automate the uninstall - From an elevated cmd prompt or other script option: wusa /uninstall /kb:5009543 The long-term option, upgrade MX to ver16.x and install the long waited Cisco AnyConnect.
... View more
Mar 16 2021
5:46 AM
Which MX are you using? We have several MX100s configured with HA.
... View more
Mar 15 2021
12:09 PM
3 Kudos
Not the best advice during this potential outage, but I learned my lesson some years back. We stood up PRTG to monitor our network in additional to the Merkai alerts. I still almost wet my fresh pants when seeing all of the Meraki alerts.
... View more
Mar 15 2021
11:43 AM
1 Kudo
Did your site to site VPN go down? We have about 21 sites across the US and all our tunnels are up. We use a separate monitoring tool to monitor. It is alarming to receive all of the up/down alerts thought.
... View more
Mar 15 2021
11:36 AM
Has anyone started using AnyConnect with Meraki MX? I just received my test device MX68CW and wondering if anyone found any issues. I know its still in BETA, but Super Excited! https://documentation.meraki.com/MX/AnyConnect_on_the_MX_Appliance
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 634 | Oct 11 2023 1:40 PM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 3 | 18247 | |
| 1 | 18649 | |
| 1 | 18893 |
© 2024 Cisco Systems, Inc.
