Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About SCC
SCC
Building a reputation
Member since Nov 13, 2018
Community Record
107
Posts
13
Kudos
1
Solution
Badges
Nov 15 2021
8:54 PM
Hi Team, I like to know we are seeing these prevalent threats under Meraki Security Center. Win.Trojan.FANCYBEAR variant binary download attempt Suspicious .top dns query How to resolve these issues.
... View more
Jun 1 2021
6:07 PM
Thanks All, After reducing the interested area its looking better now. Thanks
... View more
May 25 2021
7:20 PM
1 Kudo
I was getting lots of false alerts for the movement like spider or moth movement near the camera lense even with the 5s and 75% Hence, Now I have enabled the people detection. So far no false alert. I will monitor further, but I am sure as soon as there will be a rain I will get again so many false alert. it will be interesting to watch and monitor now what happens.
... View more
May 24 2021
6:51 PM
I have attached two screenshots - One people detection enabled and one people detection is disabled. As you see when I enable the people detection my lots of unwanted alerts get dropped. Is this not the right approach...However, in my case rain or strong wind is also generating motion alerts. NOTE: Minimum event duration is 10seconds and Motion sensitivity for trigger 75%
... View more
May 24 2021
4:00 PM
@PhilipDAth and do you have people detection and Area of Interest enabled ?
... View more
May 24 2021
3:55 PM
@PhilipDAth Can you please let me know how much is your minimum event duration for trigger and Motion sensitivity for trigger.
... View more
May 24 2021
3:49 PM
@PhilipDAth Then what i am doing different here. I am also using the latest BETA firmware. We are getting lots of unwanted alerts when there is a RAIN.
... View more
May 23 2021
6:47 PM
2 Kudos
Hi All, I am having issue with setting up a motion alerts for my MV72 outdoor security cameras. As per my configuration I have a schedule from 5pm to 6am in the morning, if there is any people detection send the motion alerts. Also, I have increased the Minimum event duration for trigger to 30seconds and Dropped Motion sensitivity for trigger to 50% but still for some reason. I am getting so many unnecessary alerts when there is a rain. I opened the support case as well with Meraki TAC and asked them the question why I am getting the alerts for rain when I have enabled the people detection. What Meraki TAC has told me that people detection is still in BETA. Please let me know if someone can help me on this, so that we get the genuine alerts only after hours if there is a real people or vehicle movement as per my area of interest configured in the settings.
... View more
Feb 7 2021
3:41 PM
Hi All, We have a setup and site to site VPN with Sophos Firewall on Azure Cloud, so what happens is that when the WAN1 goes down, the internet failover on WAN2 for which the DNS/DHCP is done by the Meraki but we have a VLAN where the DNS/DHCP is done by the local domain controller. and Internet does not work when WAN1 fails over to WAN2, However, I get the constant ping on google.com but no internet. VLAN 80 I am having the problem with the internet connectivity when it fail from WAN1 to WAN2 VLAN80 Client addressing - Do not respond to DHCP requests Any suggestion ?
... View more
Dec 16 2020
8:10 PM
@oldroo One more thing, then I need to make sure that all these ports are in one VLAN. I can have one VLAN just for this Cellular WAN traffic? correct?
... View more
Dec 16 2020
4:26 PM
Hi All, Please advise how can I connect the MG21E via a PoE switch to the MX. I do not want to use the PoE Injector for MG21E Thanks
... View more
Oct 26 2020
4:53 PM
Hi All, One query I have, if let’s say on Camera local storage I can have at least of last 30days + if I will have this license “LIC- MV-CA30-3Y - 30DAYS” can I have the recording of the total last 60days? correct. The past 30 days will be on the Security camera and then another past 30days will be on the Cloud Archive? Obviously, this will work after the cloud archive license will be applied? Thanks
... View more
Aug 11 2020
10:19 PM
Hi All, In an Ideal corporate scenario what should be the Layer-7 Firewall Rules which can be applied on Cisco Meraki. Thanks
... View more
Aug 5 2020
11:19 PM
Hi All, Any Thoughts Please. Meraki Security Cameras System Vs Vivotek Security Cameras System
... View more
Jul 27 2020
9:22 PM
Hi All, Please help to advise the steps required to configure the Guest SSID. I can do by going in to SD-WAN --> Wireless Settings. But there is no option of Client IP assignment - NAT mode: use Meraki DHCP I do not want Guest to connect to the LAN. Do i need to configure the separate VLAN for Guest and Map the Guest SSID to that new separate VLAN only ?
... View more
Jul 21 2020
6:31 PM
@PhilipDAth If the Modem is configured in the bridge Mode. and WAN IP is received directly on the WAN interface of the MX then we dont need to do this port forwarding for Client VPN? correct.
... View more
Jul 21 2020
5:22 PM
Hi All, One of the client has asked me if i would be paying for such a expensive license for MX which is Advance Security License. Does it mean i can have Machine without antivirus behind MX. Becasue Advance license does has AMP. Please advise ?
... View more
Jul 20 2020
10:28 PM
1 Kudo
Hi Team, I have the Meraki MX connected on the LAN port of the ISP Modem. I would like to know will the client VPN work ? in this case. The issue is that i can not have the ISP modem in the bridge mode. Therefore, i am not sure if the client VPN will work or not ?
... View more
Jul 20 2020
10:26 PM
Hi All, My one port on the MX is on VLAN 10 which is for Voice Due to the lack of the port on the MX and i dont want to go for a new Meraki switch at this stage as i just need one more port for one additional phone. Can i connect a one HP unmanaged PoE switch on one of the port of MX Will this work ? Do i need to define trunk or access on the MX port which will be the uplink to the HP unmanaged switch? I think it should be access on MX as the HP switch is anyway is unmanaged. Please advise.
... View more
Jul 19 2020
6:52 PM
Hi All, I am planning to deploy the Meraki Security Camera system for one of the Bus and Coach company. I would like to know since they have got a very large area. I like to know how can area or space can a Meraki security camera MV72 and MV22 can monitor ? Thanks
... View more
Jul 2 2020
3:28 PM
Well, i am not saying the device was extremely hot. But to me it does not look normal. Therefore, I kept 1RU space between switches and MX84 and also made sure that there is a proper air flow in the rack.
... View more
Jun 19 2020
3:17 PM
1 Kudo
We did two things. 1) When we went to replace the units we observed that the switches and MX are very close to each other. We thought it might be the heat may be cauing the issue. Hence while we replaced the units we have left 1RU space between switches and MX84. 2) We also put a FAN in the rack on that there is no air flow issue as well. Once these two steps are done. I have never had this issue.
... View more
Jan 27 2020
8:47 PM
Is this what i am supposed to do on the MX84 OLD VLAN 10 NEW VLAN 20 Firewall Rule Source 10.10.10.0/24 Deny All except 3389 to Destination 10.10.20.0/24 Source 10.10.20.0/24 Deny All except 3389 to Destination 10.10.10.0/24
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 1781 | Aug 26 2019 6:50 PM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 8667 | |
| 1 | 8591 | |
| 1 | 3032 | |
| 1 | 5337 | |
| 1 | 1661 |
© 2024 Cisco Systems, Inc.
