We will have an infrastructure renovation. And the equipment that we will use will be MS 425-16 (core) and MS225-48 (access) Scenario 1 The MS 425-16 (core) will be connected to the Firewall (Fortinet) In total, 7 Firewall cables will be connected to the MS. Namely: 1 cable will be for the (VLAN & SVI) of wifi guest. 1 cable will be for the LAN (VLAN & SVI) 1 cable will be for the (VLAN & SVI) of admin switches. ....and so on And also the MS 425 want it to be the DHCP And it is intended to reach the following, as shown in the following image I do not agree, because meraki does not allow me to assign an IP to a specific port. The ports can only be access or trunk but not L3. Scenario 2 I have commented having only 1 cable from the MS to the Fortinet and creating a transport VLAN between these two devices and creating the different VLANs in the MS. When creating it I will already have a default route from MS425 to the fortinet and in this way it will allow me to create my VLANs and also run the DHCP the scenario is possible ??? is the scenario correct ???
... View more