cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Delete VLAN MX

Highlighted
Building a reputation

Delete VLAN MX

 

 

I'm trying to delete a segment configured in the MX

 

Security and SD-WAN> Configure> Addressing and VLAN

 

But when selecting it, it shows me the following message

 

There were errors when saving this configuration: The IP address range 10.10.170.0/24 does not apply to any local subnet or configured VPN.

 

Where else should I save it?

This segment is no longer used in any configuration

8 REPLIES 8
Highlighted
Kind of a big deal

Re: Delete VLAN MX

Check your firewall or DHCP settings to see if it might still exist somewhere
Nolan Herring | nolanwifi.com
TwitterLinkedIn
Highlighted
Getting noticed

Re: Delete VLAN MX

"when selecting it"? as in, as soon as you checkmark it?

 

Selection_999(1253).png

 

you have to checkmark the subnet, then press the 'Delete' button. another popup will ask, if you're sure.

Highlighted
Building a reputation

Re: Delete VLAN MX

ready, look carefully and I found it even had it in Site toSite VPN

Highlighted
Head in the Cloud

Re: Delete VLAN MX

DHCP or Firewall, mostly it is still in there and you need to delete it in there first 😉

Highlighted
Getting noticed

Re: Delete VLAN MX

Hi @nst1 

 

Check below and remove the subnet that you want to delete before deleting the VLAN

1) Security & SD-WAN > Firewall
2) Security & SD-WAN > Site-to-site VPN > Turn off first

3) Security & SD-WAN > SD-WAN & traffic shaping > make sure the internet flow or anything that is configured relate to the subnet/vlan that you want to delete, if it's there, remove it too

Highlighted
Head in the Cloud

Re: Delete VLAN MX

@nst1any solution?

Highlighted
Conversationalist

Re: Delete VLAN MX

I had the same issue and noticed that I had references to the subnet I wanted deleted still inside the configuration for Site to Site VPN tunnel ACLs and Syslog server. Once removed the subnet deleted without a problem.

Highlighted
New here

Re: Delete VLAN MX

Thank you, have had multiple cases opened with Meraki and could not get this fixed, your post did the trick.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.