Meraki

BlakeRichardson · ‎Aug 28 2023

You will still require your cloud key as Meraki is unable to manage devices from another vendor.

TimButterworth · ‎Aug 16 2023

Thanks for all the replies, I have identified a small number of switches that are in low-impact areas and will ask Cisco to pin the new firmware to those for testing.

DammN · ‎Aug 13 2023

After a long fight with T-Mo I ended up with different gateway and that solved the problem. T-Mo Home Internet - if you have KDV21 gateway, there is a good likelihood that you'd end up in the same situation like myself. New gateway is from SagemCom. Thanks @KathleenJ for your help !

KathleenJ · ‎Aug 11 2023

As has been mentioned after the license expires you have a 30-day grace period to renew your license with an authorized Meraki reseller. Here is a link that provides detailed information on the access you will have after the license expires. https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_FAQs#Co-Termination_Licensing_FAQs

KathleenJ · ‎Jul 24 2023

You will need to log into your Apple Business Manager and change the settings.

PhilipDAth · ‎Jul 20 2023

Go to here: It will give you a list of licences in use: You can add anything extra you want. And then send that to your favourite Cisco distributor and ask for a quote.

MeredithW · ‎Jun 27 2023

Welcome to the Meraki Community!

Madhan_kumar_G · ‎Jun 21 2023

Hi, Navigate to Security & SD-WAN > Configure > Content filtering Remove the asterisk symbol " * " from the "Blocked URL Patterns"

KathleenJ · ‎Jun 7 2023

Yes, the MR can be plugged directly into a non-Meraki device. If you go this route, you will most likely need to purchase a PoE Injector.

TyShawn · ‎Jun 5 2023

I'm glad to see this class be added for the customer base.

cmr · ‎May 16 2023

@PJB We do as you are suggesting all the time. As @rwiesmann and @KathleenJ suggested only the WAN config on the MX might need attention when you move the equipment.

KathleenJ · ‎May 2 2023

Hi h_n, I'm not sure if you have looked at the Meraki documentation yet on NetFlow so in case you have not here are some links. https://documentation.meraki.com/MX/Monitoring_and_Reporting/NetFlow_Overview You can also do Netflow on an MS390 that is running MS 15.X and later. https://documentation.meraki.com/MS/Monitoring_and_Reporting/MS_NetFlow_and_Encrypted_Traffic_Analytics Please let me know if you have any questions. Kathleen

KathleenJ · ‎Mar 29 2023

Hi Windows_Kid As someone suggested you could do this via API. Or if it's just a couple of RF Profiles take screenshots. Meraki currently does not offer a way to export this as a CSV file but you can always click on the bottom right corner on "Give your feedback". Kathleen

KathleenJ · ‎Mar 24 2023

Hi Kautz, Meraki does not support any external/non-Meraki sensors in the dashboard. If you would like the ability for people counting and motion detection these features can be found in our MV product line. Smart Cameras | Enterprise Cloud-Based Security Camera System | Cisco Meraki

KathleenJ · ‎Mar 10 2023

I see that you asked this question a week ago, was support able to assist you?

KathleenJ · ‎Mar 10 2023

Which model AP is losing connectivity? The one's that are losing connectivity and reconnecting is at the same time or is it random?

KathleenJ · ‎Mar 10 2023

I love CRC errors, mostly just kidding. But before Meraki I worked for a test equipment company. CRC errors as has been stated are almost always a cable issue. If you are using fiber instead of copper, then the probability of a bad cable increases greatly. To test if the issue is a cable or a port if possible, move the connection to a different switch port and see if the problem follows the port. If the issue follows the port then it's a cable issue. If the problem remains on the single port then you have a bad port. Let me know if you have any questions.

py2o3434 · ‎Mar 9 2023

I'm in the same boat as you are. Our move is a couple months away and I'd like to prep what I can. Could you share what you had to do to prepare?

ilBrigno · ‎Feb 25 2023

Hey y'all, For your information, this is the reply from Meraki support: "We understand how feature like this can be helpful for network administration and our development team have recognized the need for them. For now, only Network Object are support however In the future, we will introduce additional categories such as Application, Ports and etc." Hope they will implement it as soon as possible. Thanks! Mario

DarrenOC · ‎Feb 22 2023

hi @HL1 - done this a million times in the past when merging two Organisations. If i understand your requirement correctly: - You have your existing Meraki network/Organisation in your dashboard and you wish to ingest the other company in some shape or form? With regards the other company - does the network admin still exist within the company as they'll be needed to request the licence transferal (as they own the licences). Build out the new Network in your Organisation - if you're able to export all the existing configuration via API or if a small network just have both Networks open side by side and copy the configuration over. At a convenient time (outage allowed) unclaim the devices from the old Org and then import into your. Once complete reach out to Meraki support to have the old licences moved into your dashboard. This is allowed as i've done it a lot in the past.

Noffal · ‎Feb 19 2023

Hi, The device are just shipped, so I could not give you the serial number. But, for later, I need it for check. Thank You!

Prabhu1906 · ‎Feb 14 2023

Hello Kathleen, Thank you for your reply. I'm going through the training documentation provided. It would be a great help if you help out with a troubleshooting guide if available.

KathleenJ · ‎Feb 3 2023

I'm glad you were able to solve this!

KathleenJ · ‎Jan 23 2023

Thanks for the clarification and I'm glad Philip was able to assist.

KathleenJ · ‎Jan 17 2023

Tenho certeza que você se sairá fantástico em sua jornada.

About KathleenJ

KathleenJ

Kathleen J

Community Record

Badges