Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Dylan_YYC
Dylan_YYC
Getting noticed
Member since Sep 19, 2017
Aug 16 2021
Community Record
74
Posts
48
Kudos
4
Solutions
Badges
Jun 5 2018
10:07 AM
Very good idea! Lets hope they can roll this out.
... View more
Jun 1 2018
1:37 PM
I had the same issue, with the exception of im behind a Merak MX 100! i asked support to identify what device was complaining, it was one random switch while the rest of my environment was fine. i went and rebooted it and the dashboard notice went away about a day later. Support also gave me the same response but, like you i know our ISP isn't blocking anything. I suspect its a bit of a bug in the MS software.
... View more
May 24 2018
12:42 PM
Its there.... just well hidden. I found that little nugget as i was prepping my environment for the roll-out and reading all the documentation.
... View more
May 15 2018
7:39 AM
I dont think you can. That command is for the LED on the front for status.
... View more
Just whatever you do, do not let it go over 30 days. on day 31 all network traffic in that organization will stop.
... View more
Loosing a few packets when switching radios is normal, the renegotiation time is a factor.
... View more
Best there is the documentation that they provide, it has the radiation pattern. Since each environment is vastly different, the AP will behave very differently. What kind of information are you looking for?
... View more
Apr 27 2018
7:49 AM
17 Kudos
Heh... check this out. I did this for our school, Fortnite will load, but with ping times of well over 1000ms its mostly useless! To find this information, i loaded up the game on a work computer and did a wireshark capture, from there i made this rule. Works wonders!
Message from Meraki
Hi there! We have noticed that this thread is one of the top Google search results for “How to block Fortnite” (and similar queries). Given this thread’s popularity, many of you will see it and perhaps have no idea what this “Meraki” thing is. If that’s you, allow us to answer that.
Meraki is the “cloud managed networking” segment of Cisco Systems. Meraki became a part of Cisco in 2012, became one of their most successful acquisitions ever, and is now a multi-billion dollar business inside of Cisco and growing rapidly. Cisco Meraki is all about IT simplicity, and we develop cloud-managed IT infrastructure (access points, switches, security appliances, cameras, and software for mobile device management and application analytics), with rich enterprise feature sets, combined with the world’s simplest and most intuitive IT management solution, the Meraki Dashboard. Our mission in all we develop is to provide powerful technology that simply works, and is all centrally managed from any browser, on any device, from any place at any time. A Meraki solution monitors its own health, keeps itself up to date, allows automation with open APIs, and can alert you when things go wrong.
Setting up things for online gaming like traffic shaping, application blocking, and content filtering are simple and intuitive to set up in the Meraki Dashboard with just a few clicks. If you are hearing of Meraki for the first time, please watch this video for a 2-minute introduction. And please join us for an upcoming webinar (and get a free AP if eligible), or check out this webinar recording for an Introduction to Cloud Managed IT with Meraki. If you would like a free trial of some Meraki equipment, that’s also simple to do right here.
... View more
Apr 25 2018
10:04 AM
Hey @RyanB Thanks for the follow up. As far as i can tell AMP is working well as i have used that test file recently and was unable to download it. What troubles me is this has been an ongoing issue for our site for months now, is there any indication on a resolution time? Regards, Dylan.
... View more
I see you have Layer 2 LAN isolation turned off, i would turn that on and it should stop that behavior.
... View more
Welcome to the world of Wi-Fi! I hate to say it, but that will probably cause more issues then anything else. If the device sees that as the recommended AP it will keep attempting to connect to it because the device doesn't know its been blacklisted. Your best option is to review your AP placement and adjust power levels, maybe even bring in a 2nd AP to serve the area. You could also make an SSID per floor, but that will become a problem if devices move.
... View more
Apr 24 2018
8:00 AM
That's a good idea @Adam, however we don't have that and if our routing were to change to something on the LAN we would be in major trouble. i did double check and its still using the default route to the WAN interface. At this point im at a bit of a loss!
... View more
Apr 23 2018
2:18 PM
1 Kudo
@Adam at this point there is no silly questions! Yes, it is enabled and has been since deployment.
... View more
Apr 23 2018
11:50 AM
@davidvan i have, it will show things then but not the event that triggered me to get the alert email. i still have no idea what event caused me to get that.
... View more
Apr 23 2018
11:29 AM
@PhilipDAth yeah, even if i go via the normal route everything is still blank. Im currently running the stable 13.28, and i do get the emails so i believe it to be working just not showing in the dashboard for some reason. I haven't tried turning the threat protection off and on, maybe?
... View more
Apr 23 2018
8:51 AM
Good morning, I've been having issues where ill get an email from the dashboard saying that something has been blocked by our MX, when i click the link and it brings me to the security center it always says no events, regardless of the filter timeline. I currently have an open case but its been open for months now with no change. Anybody else seeing this or herd of what is being done to fix it? Regards, Dylan.
... View more
Apr 18 2018
7:37 AM
For me, my usage and client counts for both my switching and applience network are incorrect. For the usage graphs its very erratic where the graph normally shows a steady increase as the day goes on. For the client counts, all of my clients are showing as offline, normally the indicator is green beside each client but right now they are gray.
... View more
Apr 17 2018
2:09 PM
Ok good to know. I can only see our one network. everything is working fine so at this point its just a cosmetic thing.
... View more
Apr 17 2018
1:54 PM
Good afternoon Community! I just started noticing issues with our dashboard where all of our clients are appearing as offline. I've also noticed that the usage graphs for today are completely wrong with a whole bunch of spikes where normally its a smooth increase as clients arrive during the day. Anyone else seeing this? Regards,
... View more
Apr 16 2018
7:40 AM
1 Kudo
yeah thats true, but i cant imagine a lot of places recommend doing it that tightly.
... View more
Apr 16 2018
7:38 AM
Same here! ok, so its not just me. i went and turned off all the notifications because i was getting annoyed.
... View more
Apr 16 2018
7:33 AM
as a /32? that wont work, thats just to one host. you need to define the subnet so it knows where/what to route.
... View more
Mar 5 2018
1:47 PM
1 Kudo
LOL! im sure they'll come back with "oh, nothing it must be something in my computer"
... View more
Mar 5 2018
1:44 PM
1 Kudo
No worries, if that isn't the case, then id check things like DNS, if that checks out then maybe you've got a bad link somewhere limiting you to 100mbps. Have fun!
... View more
- « Previous
-
- 1
- 2
- Next »
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 2769 | Mar 11 2021 7:48 AM | |
| 3093 | May 13 2019 9:51 AM | |
| 164193 | Apr 27 2018 7:49 AM | |
| 14093 | Mar 5 2018 1:28 PM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 17 | 164193 | |
| 2 | 10439 | |
| 2 | 4631 | |
| 2 | 17493 | |
| 2 | 9333 |
© 2024 Cisco Systems, Inc.
