Hi @DCrab Meraki switches run RSTP and not PVSTP or MSTP https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Configuring_Spanning_Tree_on_Meraki_Switches_(MS)
... View more
As @KarstenI states Graylog is pretty useful. Spin up the free version and see how much data your MX is spitting out as per the 5Gb limit for the free version.
... View more
Hi @EJN You’re only option for a reset is the physical option: https://documentation.meraki.com/General_Administration/Support/Resetting_Cisco_Meraki_Devices_to_Factory_Defaults
... View more
As above ^ shoot for the straight swap out. I had no issues swapping an MX64 over to an MX75. Configure the new device offline, WAN IP, DNS via local status page. Remove the old Mx from network and move the new one in.
... View more
Bit of a tricky one this as you literally want your users on the wifi/network to download the patch as quickly as possible and then get off again. So if you restrict or rate limit that traffic then the devices are going to be hogging airtime for longer whilst waiting for the patch to download.
... View more
Yeah, Meraki have been price matching the MR44’s to the 36’s for a good few months. This summer one customer got a full upgrade from the MR36’s to the 44’s and also Full PoE switches from the LP’s. That was one happy customer.
... View more
As previously indicated the MR36 is the like for like replacement. However, they’re like gold dust at the moment with current shipping times over 120+ days. I wouldn’t be planning this project in any time soon.
... View more
