Below are the most important changes to our documentation between September 3rd and September 21st:
Dashboard Data Storage Privacy and Security
Change: Updated with regions and screenshots
Manually Integrating Cisco Umbrella with Meraki Networks
Change: Updated to state DNS exclusion can also be entered on the Threat Protection page.
MS390 Series Installation Guide
Change: Added photo of StackPower cabling.
Network-Based Application Recognition (NBAR) integration with MR access points
Change: Added notes on disabling NBAR.
Sponsored Guest
Change: Updated with screenshots and new duration flexibility.
MI VoIP Health
Change: Note added that currently only SIP is supported for signaling.
Content Filtering and Threat Protection over Full-tunnel Site-to-site VPN
Change: Added more specificity on security functions.
Enabling, Disabling, and Changing SSID Names
Change: Clarified that bandwidth limit shown is per-client.
MX to Cisco ASA Site-to-site VPN Setup
Change: Updated link to ASA config guides.
MS425 Series Installation Guide
MS225 Series Installation Guide
Change: Clarified that rack mount rails are not included.
Cisco Meraki and Umbrella Integration - MR Advanced/Upgrade License
Change: Added notes explaining PDL license movement.
Syslog Event Types and Log Samples
Change: Added more log samples.