Thank you for your all replies. I waited to see more members join us, but it seems it's not an interesting topic. The left side of the photo shows the same design as we currently have and from your responses we go to right side network design on the photo, all switches will be connected to distribution 32P switch and then it connects to the MX and assign priority bridge 4096 to 32Port switch as lowest then we go higher depends on switch location in the network. Thank you, all, for the contribution and help.     ... View more

Congratulations @thomasthomsen ! ... View more

@chrisandrews I just wanted to let you know that I received the swag from Cisco Meraki yesterday.   Thank you once again for this lovely Gift. ... View more

We are an important organisation and have hundreds of MR46 in production. I confirm this random issue, as many others in this post. Some APs are negotiating at 100 Mbps FastEthernet, not Gigabit. After some times, they are suddenly negotiating back to Gigabit. We have Meraki switches only. When we run the cable test from the console, it always finished without any error.   We have also this issue in a new buildings, with new wiring that has been checked with a professional network tester.  The UTP cable connections is not shielded, so I'm wondering if shielded S/FTP cable is adviced to help with this issue.   If it's not a wiring issue, it should be adressed and analyzed by Cisco. They are too sensitive for normal prod conditions. ... View more

I verified that the sender was a Meraki employee in the inside sales department. ... View more

Congratulation - well done! ... View more

The issue has been resolved by Meraki team. Thank you, Amy You guys are awesome ... View more

Thank you, @Zeus  ... View more