Meraki

Jonathan_Galvez · ‎Sep 18 2023

Hi, it depends on... If a MS is connected on those LAN Ports I would definitely configure a Trunk Port (with Native: Management) instead an Access Port and allow all the VLANs there.

Jonathan_Galvez · ‎Sep 18 2023

Hi, unfortunately it doesn't help me. On this site isn't explained, why I do not see how the devices are physically connected. Let me post you a picture. My question is why I see the topology like that, when SW04 and SW02 are also directly connected to FW1?

Jonathan_Galvez · ‎Sep 14 2023

Hi Team, I have a problem to understand, how should I read the network topology. I have one MX and more MS all the MS are directly connected to the MX. Unfortunately in the topology I show more like cascade. It seems like the MS are connected to each other but this is wrong cause all are directly connected to the mx. I have check everything and could find something: When I check the port which is connected diretly to the MX I see in the CDP/LLDP list, that in top is not the MX listed. - Meraki MS225-48FP - SW01R / 49(Meraki MS225-48FP Cloud Managed PoE Switch)raw - MS225-48FP / 47(MS225-48FP)raw - Meraki MX95 - FW1 / 5(Meraki MX95 Cloud Managed Security Appliance)raw - MS225-24P / 23(MS225-24P)raw - MS120-8FP / 9(MS120-8FP)raw And this is the problem in the topology I see like this switch would be connected to the SW01 but this is wrong, it is directly connected to the FW1. Can someone explain to me, how should I read the topology. Many thanks!!! Jonathan

Jonathan_Galvez · ‎Jul 12 2023

Thank you for your responses, I will have a look and let you know if it helps!!!

Jonathan_Galvez · ‎Jul 12 2023

Hi team, my customer ask me if it is possible to have a temporal voucher from meraki. For example: The receptionist should be able to create a voucher for temporal WLAN use (only for one hour for example). They do not want this users to manage the whole user list, so a embassador isn't an option. They also ask if would be possible to activate these Vouchers more times on a day. Regards, Jonathan

Jonathan_Galvez · ‎May 26 2023

Hi team, we are trying to assign a Group Policy to a WLAN client. In the passt we assigned the client with the add client option and then chosing the group policy or just changed it manually. I am now trying to do that just adding the group policy on the VLAN (MX). The scenario is like: Client logged in to a SSID and get VLAN:4, it seems like the policy is assigned but I can not see the group policy assigned on the client list. To know if there is a policy applied I make a change (block www.youtube.com) but it still reachable from my client. Is there a time I need to wait, until the settings on the group policy are synchronised? So my questions are: Is it normal that when a Group Policy via VLAN is applied, I can not see it on the client list? If I make a change on the group policy, how long is needed to be applied on a logged client? Many thanks and regards, Jonathan

Jonathan_Galvez · ‎May 12 2023

Hi Team, just made a telco with a customer and they through me some questions, which I couldn't answer, hope you can help me 🙂 WLAN-Guest. If we use Ambassador Accounts: What happen with the user, when the authorized time is expired? Will the automatic deleted or remain in Meraki as a User with the same username/psw until the Ambassador authorized the account again? WLAN-Company devices: They do not want to use PSK and only allow company devices to use WLAN. They do not have RADIUS Server and Group Policy manual change is also not an option. Is there any posibility maybe with certificates/Active Directory/ Azure...that only company devices are allowed to use WLAN? Many thanks and regards, Jonathan

Jonathan_Galvez · ‎Apr 24 2023

Hi team, I need to know how Meraki update the web sites for the content filtering. A customer just found some sites, which aren't categorised and they want to know how/oft Meraki update the content filtering web sites. Many thanks, Jonathan

Jonathan_Galvez · ‎Feb 27 2023

Hi Team, I couldn't find anywhere...but for sure someone know if that is possible 🙂 My question is: Is it possible to give a user just content filtering permissions? The idea is that they should only be able to change the content filtering configuration but just this nothinelse. Read permissions is not a problem but change only Content Filtering page. I know in CUCM is possible to make page permissions, maybe on meraki too? Many thanks and regards, Jonathan Galvez

Meraki

Community

About Jonathan_Galvez

Jonathan_Galvez

Community Record

Badges

Re: Issues implementing VLANs on MX84

Re: Understanding Network Topology

Understanding Network Topology

Re: WLAN temporal Voucher

WLAN temporal Voucher

Group Policy assignment

WLAN-Guest and WLAN-Company Devices customer requirements

Content Filtering// Web Site update

Content Filtering permissions