Meraki

SNSGS · ‎May 27 2021

@KarstenI 3) I clicked on the core switch and its listed in the Summary tab. The RSTP ROOT has the other switch listed with a higher bridge priority. I then clicked on that switch and noticed RSTP ROOT has the value "This switch".

SNSGS · ‎May 27 2021

Hello, I'm having issues with getting a specific switch/stack as the RSTP ROOT in a network despite it having a lowest Bridge Priority. I've the core stack (comprises 2 x MS210-24P) with Bridge Priority 4096 I've the "master" switch of a stack (MS210-48P) with Bridge Priority 16384 The rest of the "member" switches (MS210-48P) with Bridge Priority 61440 Questions - 1. None of the uplink ports to the router or the ports involved to connect each stack have STP Guard enabled. Should I be enabling RSTP Guard? 2. Should the "master" & "member" switches in a stack have the same Bridge Priority or its OK to have as mentioned above. 3. How can I get the core switch/stack to become the RSTP ROOT? I've read the articles on Meraki website but I'm still unable to get this working. Any help is appreciated. Thanks.

SNSGS · ‎May 26 2021

Just a follow-up question based on the info you provided. Can I implement link aggregation for stacks that are connected by fibre?

SNSGS · ‎May 26 2021

@Bruce many thanks for the detailed response. I was able to successfully create the link aggregation between the stacks. Everything seems to be working well. I also lowered the priority of the core stack. Really appreciate your assistance.

SNSGS · ‎May 26 2021

Not a network expert so need some assistance here. I've two stacks in the same rack that need to be connected using Ethernet. 1. I'm planning to connect port 1 of the admin switches to port 2,3 & 4 of the core switch 1. Is this correct? If yes, then what should be the STP guard setting be on the core and admin switches for these ports. 2. If point 1 is incorrect, could you please advise which ports on admin switches be connected to the core switch and also the ST guard settings? Thanks in advance.

SNSGS · ‎Apr 26 2021

Hello all, New to Meraki community and my first post here. Deploying around 70 MS210 switches across our sites. Any recommendation from experts here on which Syslog server to use? I prefer a SaaS solution which is reasonably priced. Thank you.

SNSGS · ‎Apr 26 2021

@BrandonS I see that PaperTrail has pricing based on storage capacity rather than number of endpoints. Are you able to provide an estimate of storage required per switch. I'm looking at deploying around 70 switches. Thanks.

Meraki

Community

About SNSGS

SNSGS

Community Record

Badges

Re: Issues with Bridge Priority

Issues with Bridge Priority

Re: Need assistance with STP Guard

Re: Need assistance with STP Guard

Need assistance with STP Guard

Any recommendation on Syslog tools to use with Meraki switches

Re: Preferred Syslog Server