Meraki

MIFA · ‎Dec 1 2022

My guest net Click through Splash page does not work on ver. 17.10.2 (MX67W). No problem on Ver. 16.16.7.

MIFA · ‎Dec 15 2020

Hi @DarrenOC Thanks for the link, however I think it's only for filling one of the purposes. User authentication, not machine authentication, or am I wrong? Br Michael

MIFA · ‎Dec 9 2020

Hi I would like to use 802.1x and a NPS server to authenticate users on my wireless network, but I also would like to machine authenticate as well. User and machine are domain joined, but may run into machines that are not domain joined. So user password should be validated on the domain server via NPS, and I will also make sure the machine is the correct one via a certificate. All the how to guides are using User Auth or Machine Auth, not both. Have I misunderstood something? Regards Michael

MIFA · ‎Oct 29 2020

Hi bmehta. Thanks for your reply, but I don't think it's correct. Well the first part is, but as I wrote it's only L3/L4 so not of any use in my scenario. I need L7 rules. Regarding bandwidth limit on celluar. Are you sure that the celluar setting is limiting the bandwidth and not indented to make some policy based decision on with connection to use? Anyway, the ability to make some L7 firewall rules, which could come into play when celluar interface is active, should be the right way to go, and not only L3/L4 rules.

MIFA · ‎Oct 27 2020

I have a lot of MX67C with cellular failover connections. It works great, but when the cellular connection goes active and all the data on the SIM card is used, the site still goes down. Is it possible to limit bandwidth or disable streaming when Cellular connection is active? I can make some special firewall rules which is enabled when Cellular connection is active, but they are working on layer3, so they can only block ip ranges. Traffic shaping seems only to be between "real" WAN connection, which the cellular connect not is treated as. Thank you. Michael

Meraki

Community

About MIFA

MIFA

Community Record

Badges

Re: MX firmware 17.10.2 has moved from stable release candidate to stable

Re: Possible to user authenticate and machine authenticate at the same time...

Possible to user authenticate and machine authenticate at the same time?

Re: Limit applications or bandwidth when on Cellular failover connection.

Limit applications or bandwidth when on Cellular failover connection.

Re: MX firmware 17.10.2 has moved from stable release candidate to stable