Meraki

Noffal · ‎May 25 2023

Hi, Thanks for your confirmation, it should be same with MX105. Thank You!

Noffal · ‎Feb 19 2023

Hi, The device are just shipped, so I could not give you the serial number. But, for later, I need it for check. Thank You!

Soichiro-Ono · ‎Feb 2 2023

Hi @Noffal Again, the chassis side of the cable (MA-PWR-CORD-*) is C15. And the inlet on the MX95 chassis side is C14. Not C13. Physical talk can connect. The C15 connector is designed to connect to the C14 and C16 inlets. IEC standard. There are C14 and C16 models on the Meraki Power supply module side, but the cable (MA-PWR-CORD-*) can be connected to both in common. Since it has been officially verified by Meraki in the first place, the MA-PWR-CORD-* will definitely connect. 3rd Party? Self-responsibility. Power Cord Types, Power Cable types, Power Plug types | FS Community A C13 connector cannot be connected to a C16 inlet. Because it is designed to exceed the temperature rating of C13/C14, there is a notch in C13/C14 so that it cannot be inserted because it is dangerous. Regard,

Bruce · ‎Nov 18 2020

To be safe just go with the EU to C15, it will fit into a C14 or C16 socket on the back of a switch/power supply. (a EU to C13 won’t fit a C16 socket)

DarrenOC · ‎Jul 21 2020

Hi @Noffal https://documentation.meraki.com/zGeneral_Administration/Cross-Platform_Content/Behavior_during_Connection_Loss_to_Cisco_Meraki_Cloud This document should help. You’ll lose management access but local network traffic will Stay active

WD · ‎Jun 30 2020

Welcome to the community.

PhilipDAth · ‎Jun 30 2020

On failure remove the failed MX from the network, and then add the cold spare in inventory to the network.

General-Zod · ‎Jun 29 2020

Generally speaking, simply having a device that is unused in your inventory won't go towards a license count. In the case of MX's, if you go down the HA path and add the 2nd MX to the same network with a existing MX you will still be within the license limits as you don't need another license if you setup a MX HA pair. Hope this helps

WD · ‎Jun 11 2020

Yes this is for site to site VPN

Meraki

Community

About Noffal

Noffal

Noffal Ade Putra

Community Record

Badges

Re: Meraki MX105 WAN Interface using SFP-1GB-SX

Re: Meraki Warranty, is it include?

Re: Default Power Supply for MS250-48FP, MS250-24P & MS425

Re: Meraki Switch Power Cord

Re: Control Plane and Data Plane on Meraki Switch

Re: Introduce myself

Re: Moving License from one Device to another Device in one Organization

Re: Moving License from one Device to another Device in one Organization

Re: IPSec Compatibility Meraki MX250 with Mikrotik RB450

Introduce myself