Meraki

IsaacG · ‎Sep 22 2023

You only need one of them configured on the switch were your core AV device is that discovers all the A/V devices on the network(and put the querier on the correct vlan). You also only need the IGMP querier if they are on separate switches. We had a Shure vendor tech support try and tell us that the Mics didn't support vlans but that was just them trying to blame our network for audio streams making it to the core device but getting silently ignored(when they had been working for years before without issue).

DR1 · ‎May 27 2023

@ana_nennig @Meraki Can someone respond to that Nov 17, 2022 question? You refer to a JIRA template in your documentation thats not available in our dashboard. The custom template option is also 'greyed out' so we can't use it.

PhilipDAth · ‎Jan 9 2022

Only by displaying it on a computer first, and then casting the Chrome tab to the Chromecast. Otherwise, I can recommend an "AXIS T8705 Video Decoder" and use RTSP. https://www.axis.com/products/axis-t8705-video-decoder

pfdan · ‎Jul 29 2021

Hey @DR1 , We're in a similar situation. 3 x MS225s distributed across three floors and we don't want to use up all the 10G SFP+ ports on the front of the switch as trunk up to the other switches from the one in the server room. Based on what was suggested in the long post above, I should get away with these https://www.fs.com/uk/products/36157.html and this https://www.fs.com/uk/products/68017.html I think? Either way, they're cheap enough that it should be an issue to try them out and see what happens. Did you mange to try anything with QSFP+ over a fibre connection? Unfortunately I don't think I'll be able to offer any experience in the future on you endeavour to use QSFP28 transceivers as we don't have any in our switches.

DR1 · ‎May 19 2021

As was suggested by a few members, all it took was a call to support. They switched the Cellular firewall rules so they would apply to WAN2. Thank you

DavidHild · ‎May 18 2021

I never got a response here but the resolution had to do with AT&T misconfiguring their circuit which caused the MX to do strange things.

Mihail · ‎Feb 1 2021

I have been using NDI for live streaming sports interviews. My LAN setup is: iPhone 8, using the NDIcam app > MR52 > MS220-8P > Lenovo streamer laptop The limiting factor of course in this setup is the distance from where the interview takes place to my MR52, so I have not really pushed the boundaries in terms of bandwidth, as I'm running live streams and don't want surprises. 🙂 All in all, my experience has been very positive. You can see an example of video transmitted over NDI here: https://youtu.be/VFm7SgHJ1uo?t=14677

KarstenI · ‎Jan 10 2021

I would just put two Cisco Firepower 1120 in the two offices and run an IPsec VPN through the other organisations infrastructure. And if they provide you two ports you could also do redundancy. Another solution would be (but I am pretty sure the other organisation can not provide the infrastructure for this) to put two Catalyst 3560-CX in both offices and protect the link with MacSec. This would work if they can provide you a "patched" link without any of their outdated switches in the connection.

DR1 · ‎Jan 4 2021

@EJN Kicking myself now because this article was hiding in plain site. I think this was the problem in at least one of the cases earlier and suspect that I could improve IR quality by loosening some of the MV22x gaskets before tightening the covers back into place so they're pressed right up against the dome. Thanks for pointing it out!

JohnOetinger · ‎Dec 16 2020

I found that forum not long after I posted here (the print is small; I missed it when I was looking initially). I have since started a new topic in that forum; I've gotten some responses, but no answers yet

DR1 · ‎Dec 16 2020

This was entirely self inflicted. Group policy based ACL's had been partially built out in certain places. It took me awhile to verify, but after addressing the restrictions created by ACL's, everything seems to be working!

EJN · ‎Dec 15 2020

Love LHLS. We have 100 MV 2nd Gen and I'm experiencing under 1 second delay when on the LAN. The prior 3-6 second delay was OK for our use-case, but this makes it so much nicer when it's almost real time. Thank you Meraki team.

IT_Magician · ‎Nov 30 2020

We use TP-Link switches on the edge.. non managed of course. This was after days of troubleshooting with Cisco Meraki support they finally said it wasn't supported. I suppose there are ways to do it, but at that point we found non-managed switches on the edge worked best for us.

PhilipDAth · ‎Jul 8 2020

Unless you like a lot of maths you wouldn't want to do it with an MV32 because of the fish eye lense. Everything straight line is a curve. You would want to look at MV12s or MV22/MV22-X. The MV22/MV22-X might be needed to get an optical zoom if the camera is going to be high up. The easiest option would be to instead use people counting via MQTT. If the room exceeds "x" number of people then generate an alert. Otherwise you are going to need to use the same people detection via MQTT, but calculate the distance yourself and calibrate those distance measurements. With regard to people counting and you are able to "cut some code", you could base it off something like my ICU code, and just change it to only trigger when a specific count is exceeded. https://www.ifm.net.nz/cookbooks/meraki-icu.html

CarolineS · ‎Feb 21 2020

Hi all, Please see this thread for Meraki's updates regarding the maintenance that was performed earlier. Cheers!

Meraki

Community

About DR1

DR1

Community Record

Badges

Re: Multicast Basic's

Re: 🔥 Dashboard API v1.27.0 Released 🔥

Re: Displaying video wall options/ settings

Re: QSFP28/QSFP+ stacking with off-brand cables. Who has done it? What did ...

Re: Heavily restricting allowed traffic on WAN2?

Re: Unidirectional link (outbound fault) Error

Re: MS switches and NDI from NewTek

Re: Looking for advice: How to transit through another organizations intran...

Re: MV22X, IR LED's reflecting off inside of dome

Re: Requested access to MSP and Beta forums. Email ignored.

Re: Cameras in other VLAN's defaulting to cloud streaming for same intranet

Re: Low-latency HLS available with Camera 4.8 beta firmware

Re: Redundant uplinks to MX from Switch Stack. Is it even possible?

Re: Using MV32 object tracking analytics to approximate distance between ob...

Re: Problem for Creating account

Re: Cameras in other VLAN's defaulting to cloud streaming for same intranet

Re: Low-latency HLS available with Camera 4.8 beta firmware

Re: MS switches and NDI from NewTek

Re: MS switches and NDI from NewTek