That seems to be the case with the port issue. And it persists between different ports, and ONLY the Uplink port. I have yet to reset the GX just to test and see if there is some communication/negotiation issues that is causing this.   Link to what I'm seeing in the App - Previously my Uplink to my GX on switch page was reporting as bad/red. Now it's showing as green, but details mention issue with the port.   Changes Ideas Added hardware Network changes VLAN added/destroyed Ports Tagged/untagged SSIDs Created/destroyed DHCP pool exhausted Added Admins I agree that getting an alert for everything may be noisy. But an idea is log all changes for those who do want to seek it out, and only alert for some of the things above that could be mission critical. ... View more

Re - Port issue - While the switch isn't reporting an issue, the port is. Uplink from GS to GX. GX not reporting issues. Issue persists when changing uplink and even after factory reset. Been reported to support and mentioned they would get devs involved. Likely a software issue. -- FWIW initially port was being negotiated at 100mbps, but reseat resolved.   In app Notifications/Emails would be great for both issues and network changes   As for placement of changes, based on how app is currently, I think what makes most sense it to put it within the settings to centralize ALL changes. Better this than within the individual hardware as it will be clunkier. If multiple tenants, select tenant first then see access to changes. -- Goal is to have something similar to how Meraki Dash currently manages changes. ... View more

So looks like you can. I just tried plugging in my GX hostname in the DDNS portion and it picked it up no problem. I didn't finish the setup, but since it didn't give me any errors, I think you're good to go! ... View more

250mbps is the minimum. I reach 300 with mine no problem, which is what I pay for. From your issues it seems more of a networking issue than it is throughput. You can test this by replacing the Meraki Gateway with another and see if that impacts anything.   If you need specific enterprise features, yes Meraki Go isn't intended for that purpose, though it's possible they'll continue to add features (which they do) at a later date. ... View more

There is a throughput test on the local status page of the device. ... View more

Current hardware is likely based on Meraki SMB/Enterprise Z1 Teleworker appliance. I'd suspect within the next few years they will, but as of now, there is no real need since they're still getting their feet wet for SoHo / Entry level SMB.   For you're office, you're better off getting actual Meraki Hardware, such an MX67 ... View more

Good to know. Thanks for the Info @PhilipDAth    I'll keep it whitelisted for the time being as I want to refrain from using beta firmware at this location for the time being. ... View more

Hey @Seshu, thanks for the response! That's what I suspected, but the clarity definitely helps.   Fortunately it looks like it was getting blocked by IPS/IDS and was overlooked in Security Center. Shows that the Datto Appliance is being treated as an SSH_EVENT_RESPOVERFLOW threat, and looks like there are others with MX appliances that are facing the same issue. Whitelisting allowed the appliance to successfully offsite.   I'm assuming there is also no way for you to whitelist a Rule ID to a certain scope devices?   Not sure if it's a bug with the MX firmware, or if a specific version of SSH/SFTP software on the appliance is causing the MX falsely claim it as a threat. ... View more