You can not control endpoint WiFi setting from Meraki AP, AP does not have mobile device management capability   ... View more

some one from Meraki DevOp team can answer best but let me give it a shot,   some attributes of configuration API are   Create, update, or delete operations. Configure network settings, policies, devices, and applications. Set parameters that affect the operation of the network   for instance  "getOrganizationInsightApplications" API endpoint retrieves information about insight applications for an organization, which is typically used to configure and manage these applications within the network. This is why it falls under the Configuration category, as it deals with setting up and modifying configurations.   some attributes of monitoring API are   Read-only operations. Retrieve status, metrics, logs, and reports. Provide real-time or historical data for analysis and monitoring purposes.   for instance  "getNetworkSmDeviceConnectivity" API endpoint retrieves connectivity information for devices in a Systems Manager network, which is used to monitor the current connectivity status and performance of devices. Hence, it is classified as a Monitoring API, as it focuses on observing and reporting the state of the network rather than changing it.   hope this helps     ... View more

out of curiosity re-enter shared secret again on both side and see if it changes anything. ... View more

elaborate your question with an example ... View more

Try calling TAC and see if API will work, if you can not do from dashboard in template, I haven't tried it myself yet. https://developer.cisco.com/meraki/api-v1/create-network-vlan-profile/   ... View more

all depends on how the switches are setup, if the switches are connected through a layer 3 link they you will need VLAN (subnets) in each side of L3 link  to be advertised to each other to be reachable, so you will need some routing (static or OSPF), if the switches are connected with L2 trunk then you don't need OSPF ... View more

are they on wireless ? is client isolation enabled under firewall and traffic shaping ? ... View more

submitted ... View more

I used google translator, hope its clear   MA-ANT-25 es una antena de doble banda; se recomiendan dos antenas por MR76. Tener dos antenas mejora la diversidad espacial, lo que ayuda a mitigar problemas como la interferencia de trayectorias múltiples. Esto conduce a una conexión inalámbrica más confiable y estable. ... View more

what's the source and destination between which you are measuring speed ? ... View more

I have 30.7 in production and a test lab on 31.1.2 no issues with radius, I am using Cisco ISE as radius.   can you share more information like, if you are seeing logs on radius and share the logs to understand why radius authentication is failing. ... View more

Binding your Google Domain to Meraki MDM should not inherently cause issues with existing Chromebooks managed by the Google Admin Console, provided that you: Maintain clear separation of management roles between the two platforms. Ensure user directory synchronization is correctly configured. Avoid overlapping or conflicting policies. would strongly recommend to open a case with Meraki before integration and test.   ... View more

In my case it’s cisco hosted voip which uses VMX in cisco hosted cloud, I don’t know if they use any third part in backend. But you can find VMX in AWS store Or on Azure marketplace ... View more

most people would use some kind of MDM for this kind of work, JAMF is well known for Apple devices, you can also consider exploring Meraki Systems Manager, you can use for free trial up to 100 devices. (not any more, thanks for correction @PhilipDAth ) typically what you would do is create a provisioning SSID which can be open or MAB, connect iPads to the network and provision devices for 802.1X with PEAP or EAP-TLS,  if you don't want to get into hassle of certificate management you can use single cert for all (not recommended, but if you are short staffed) . once provisioned devices will disconnect from open and will connect to secure SSID, once all provisioning is done disable open SSID. ... View more

. ... View more

whats your background and experience with computer networks ? if you give a short few 2-5 line summary it would be easier to answer in a way that would make sense to you. ... View more

So it’s radius assigned then port based then manual ip-sgt map then manual vlan-sgt map, that’s the order of priority.  dns is off course not getting tag any other way than ip-sgt mapping, so it’s not over written. Policy is deny, I checked again.  It’s a Meraki switch, how do I do sgacl? It’s all AdP policy based.  ... View more

So upgrading from 29.x to 30.x resolved this issue, I can assign SGT on ssid and it stays there, I can see the CMD header in capture now. I also notice peer sgt was not enabled on some of switch port connected to AP, but the one was I capturing had it enabled. not able to save sgt in group policy is expected behavior, feature supported in 31.x (in beta) not 30.x that I am running.  ... View more

Yes ... View more

never mind, syntax issue, thanks for the help. ... View more

I realized and fixed it earlier but I can't even get a simple GET from postman for that url. I get the same 404 error. when I try other GET requests like for getting Network_ID  it works fine. ... View more