Meraki

rwiesmann · ‎Jul 2 2025

In the Meraki Dashboard, go to Cameras => under Monitoring => Cameras There is a pen by the default name, click on it and change it

rwiesmann · ‎Jul 1 2025

Congratulation to all of you! It was fun to be part of it. Thanks @AmyReyes !!

rwiesmann · ‎Jun 24 2025

Congratulation to all of you....keep collecting points! 💪

rwiesmann · ‎Jun 16 2025

Wow, impressive progress on collecting point...keep going! @AmyReyes thanks for the update

rwiesmann · ‎Jun 10 2025

no prerequisits on the switch needed...create an meraki org and then claim the order

rwiesmann · ‎Jun 10 2025

Well then i guess you have to contact the cisco partner you bought it or open a support case. I guess you used the right number to claim the order (12 digit)

rwiesmann · ‎Jun 10 2025

ah...what does it say? could it be, that the device is still claimed in a different organization?

rwiesmann · ‎Jun 10 2025

did you get an error while claiming the device or do you not know how to claim a device' Organization => Inventory, there on the right side the blue button claim device here how you claim it. https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Using_the_Organization_Inventory

rwiesmann · ‎Jun 10 2025

thanks for sharing...looking forward to test it

rwiesmann · ‎Jun 5 2025

Congratulation to all of you! Nice effort and well done...nice to see and learn all the time from the top contributors!

rwiesmann · ‎Jun 3 2025

Well that's good...hope I will get with one click to mycases.

rwiesmann · ‎Jun 3 2025

well as I see it...it is just limited to 1000 Vlans. See the following documentation in the section "VLAN Database" https://documentation.meraki.com/General_Administration/Cross-Platform_Content/VLAN_Profiles#VLAN_Database hope this helps roger

rwiesmann · ‎Jun 2 2025

Well nice is the points contest back! Thanks @AmyReyes, I am happy to participate 😀

rwiesmann · ‎May 30 2025

Check out this Link: https://documentation.meraki.com/MR/Cloud-Managed_Hybrid_Operating_Mode_for_Catalyst_Wireless_LAN_Controllers/Cloud_Monitoring_for_Catalyst_Wireless_Requirements You will find the supported WLC and AP's in it It looks like the 9800-CL is not yet supported...also writen in the following post https://community.cisco.com/t5/wireless/9800-wlc-with-9115-aps/td-p/5252596

rwiesmann · ‎May 28 2025

Do you knwo the learning Hub? https://community.meraki.com/t5/Learning-Hub/ct-p/hub Here also the documentation to AP (Installation and Configuration Guides) https://documentation.meraki.com/MR

rwiesmann · ‎May 28 2025

check out this https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Organization_Menu/Manage_Tags you can add tags to a device and at the same time remove another tag from these devices

rwiesmann · ‎May 21 2025

Check out this community post https://community.meraki.com/t5/Dashboard-Administration/dark-mode-for-dashboard/m-p/31097

rwiesmann · ‎May 20 2025

As mentioned to do it yourself, you need to be admin on both organization. see here the part out of the documentation: Only organization administrators with full read/write permissions on both source and destination organizations will be able to request a license transfer. The full org administrator requesting the transfer must have the same email address on the source and destination organizations. If you can not get admin in both orgs...get in contact with your meraki contact.

rwiesmann · ‎May 20 2025

Well, you need to be admin in both organization. Initially it was only possible to do it with a support case. Now it should be possible, but as I checked today, the other organization did not show up...so this maid be temporarly. Check out this document https://documentation.meraki.com/General_Administration/Licensing/How_to_Request_a_License_Transfer hope this helps

rwiesmann · ‎May 14 2025

In a Meraki Subscribtion the devices (in your case the MX's) are divided into product classes (MX small, MX medium, MX large...) https://documentation.meraki.com/General_Administration/Licensing/Subscription_-_MX_Licensing In subscribtions you can either have Essential or Advantage which is also described in this document (E and the A in the sku) You always need a license for Meraki device.

rwiesmann · ‎May 8 2025

You need access to the local status page of the AP...check the following documentation. https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Out-of-Band_Log_Fetching Access to local status page: https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page If you do not have this...give this feedback back to support and ask them if there are other ways to fetch it hope this helps

rwiesmann · ‎May 6 2025

Don't you have the option to set a custom dhcp option, like described in the following document? https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Setting_Custom_DHCP_Options

rwiesmann · ‎May 6 2025

rwiesmann · ‎May 6 2025

Congratulation to @AhamBramhasmi , @Gordon-HoC and @Tony-Sydney-AU, well deserved! And also to the top twelve, big congratulation! All of you can be relied on! thanks a lot!

rwiesmann · ‎Apr 24 2025

I think it is still not possible. Check out this documentation https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-Site_VPN_Settings The following part: An MX that builds tunnels to both Auto VPN and Non-Meraki VPN peers will not route traffic between other Auto VPN peers and the non-Meraki VPN peers unless BGP routing over IPsec VPN is enabled for the latter.

About rwiesmann

rwiesmann

Roger Wiesmann

Community Record

Badges