Yes there is a difference @EricWenger .  MV has the possibility of having up from 1 to 3 licenses depending on your needs.   1.  MV License in general is required for management, viewing, support, warranty, and all the things really to get you going.  So with every MV hardware you would need to get a MV license to start.  https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_FAQs    2.  MV Cloud Archive - OPTIONAL - and is there if you wish to store video in the cloud.  https://documentation.meraki.com/MV/Initial_Configuration/MV_Cloud_Archive   3.  MV Sense - OPTIONAL - all Organizations come with 10 free MV Sense licenses and this is really around going deep on your analytics for what the MV cameras can offer with customization and a variety of machine learning applications .  https://meraki.cisco.com/lib/pdf/meraki_datasheet_mv_sense.pdf    So you need to make sure you have #1 to start and get you going and the other 2 are completely optional. ... View more

Hello, In the learning course i find lot of things about MS,MR and MT, but no course about MX, why ? and where i could find them ?   Thanks. ... View more

Hi @leeeeleeo ,   You will have to contact Cisco Global Export Trade for this information, as Meraki does not host this. We work closely with Cisco to get these regulations in place.   You may reach out to GET at https://www.cisco.com/c/en/us/about/legal/global-export-trade.html   Thanks, Mark ... View more

going to steal some of these tips, didn't know some of them ... View more

this is still a common issue as of Sept 2022,  we are on the most updated firmware. we've had about 40 instances in the last 2 months where we had to call support.    no permanent fix in sight.     ... View more

Im glad to inform, that although I was on period grace, just 2 days, i send the email to promorenewals@meraki.com this saturday when i see that my organization has not be auto renewed, today (monday) i got a notification that I'll be receiving an email with the confirmation order to renew the organization, and it came and now my organization is licensed to 2025 😁 ... View more

Thanks for clarifying - I guess I have to be a bit more forward thinking then 😉 ... View more

Same. "User" is contained in all user based networks, and the site code for company locations. VPN hubs have a different naming convention. Nicely groups things together, and the filter + naming standards make it super easy to find anything. ... View more

Thanks All, I replace the current AP with another, It seems ok.  Thank for your suggestion all   Thank you GiapCuong ... View more

Thanks guys. Unclaimed, reclaimed. Seems resolved.   You all rock.  ... View more

Got it, thanks for the response Donovan ... View more

Hi WiFiMcNal   CMNO has been retired and replaced by ECMS1. You will want to reach out to certifications@meraki.com for further assistance.    -Donovan ... View more

Hey adten! Method 1 in the documentation UCcert linked is gonna be your best bet. Meraki spoke configurations point to a particular hub network on the dashboard, and ultimately don't care which model MX is within that network. As long as you add the new MX450 to the same network that the old MX100 was in, all of the spokes will re-negotiate their tunnels to the Public IP and Port of the new MX450. Overall the only change that is made is which hardware serial is claimed to your Hub network and turning VPN back "on" for that network, the spoke configurations will be left alone.    Let me know if you have any other questions!       ... View more

DJDonovan, thank you, so how can one retrieve the URL logs once they are stored?  Is there a software or a way we recommend? ... View more

hehehe thanks a lot! 😊😊 ... View more

>Ok so I don't need to link them to network right away just have them calimed?   They have to be linked to the network.  Until that point in time their is no way to determine what config should be placed on the device. ... View more

Hey Bastian!   In general, it is recommended you have no more than two Repeater APs attached to a single Gateway AP. It's also in your best interest to have multiple potential gateway APs so that there is not a single point of failure that would knock all of the repeaters offline.   Further guidelines regarding a Mesh Deployment can be found in the following documentation:  https://documentation.meraki.com/MR/Deployment_Guides/Mesh_Deployment_Guide#Deployment_Considerations   Let us know if you have any other questions!   -Donovan ... View more

Looks like the AP is losing cloud connectivity due to poor signal quality for the mesh link. Are you able to move the repeater closer to the gateway AP to see if it stabilizes? That or maybe tweak how the external antennas are attached to make sure they have a direct line of sight with the gateway AP. If you can't move anything, Meraki support will at least be able to confirm if my theory is true so it's worth opening up a case with them.  ... View more

Hey Greg,    It looks like at this time there's no way to do a shared iPad deployment while also disabling the Guest Mode feature separately.    -Donovan Edit: It looks like Apple has recently introduced the ability to do this, but, we have not implemented it yet into our solution. I actively encourage you to submit a feature request for this ability via the "make a wish" box on the dashboard so that our Product team is made aware that we have a demand for this functionality.  ... View more

Thanks,   Yes to clarify, it's neither of those, it's the Analytics/Location API (under General for a site) - which requires a URL to post data to, and then a secret, which is exchanged when the data is sent to verify it's source.   That secret is disappearing when firmware is updated, and so the data is no longer accepted at the receiving end (as the sender can no longer be verified).     It's consistently happening across more customers as /when firmware updates are being rolled out to the MR range of devices so far.   ... View more

@route_map you certainly can and I have this working in my home lab just fine, the MV detects human motion, triggers an alert and sends a snapshot from the camera via a Webex Teams chatbot.  Here's a self-paced guided lab to get it going!  cs.co/adventure   ... View more

I would probably also consider doing a hard reset on the MX.. ... View more

Its how you learn!  Definitely don't have what it takes to be a teacher either! ... View more