Meraki

Tuvestam · ‎May 15 2023

Hi, I have a user using SSO that can see the camera when he login to the webpage but not using the app on his phone (iPhone). It's just shows no device.

Tuvestam · ‎Nov 17 2022

It looks like it's Microsoft redirection to check if there is network connection. Thank you for the time

Tuvestam · ‎Nov 17 2022

Well as it works on other SSID without geting a splash I think it is. But other computers does not have this problem.

Tuvestam · ‎Nov 17 2022

Yes and I don't get it on an other SSID that is from the same AP etc. I have reset the network and everything. I can se that the connection also is w8 on confirmation from the splash page. But as ther is none it will not work.

Tuvestam · ‎Nov 17 2022

msn.com

Tuvestam · ‎Nov 17 2022

We have a MX but the access control is not configured (set to None (direct access)).

Tuvestam · ‎Nov 17 2022

Hi, I have a Windows 10 computer that till show a splash page while i connect to our SSID. All other computer connecting to the same SSID does not have this. If I try to connect to another SSID on the same AP there is no problem.

Tuvestam · ‎Oct 4 2022

I think with the latest update there is a button for SSO. Before you hade to klick on the logo 3-5 times. And then you enter your SSo subdomain.

Tuvestam · ‎Jan 26 2022

@joe It's been soon 2½ year and no update no news no nothing. Please share information on the progress of implementing SSO to the app. I think it's crucial to all users of the app.

Tuvestam · ‎Oct 22 2021

Any updates on the SSO? We are using this to setup access to cameras and the users want to be able to log in to the app.

Tuvestam · ‎Nov 9 2020

I got it working after doing what this link say (For MG but work for MT too). https://documentation.meraki.com/MG/MG_Templates_Best_Practices#Appending_MG_Cellular_Gateway_Networks_to_Existing_Templateshttps://documentation.meraki.com/MG/MG_Templates_Best_Practices#Appending_MG_Cellular_Gateway_Networks_to_Existing_Templates And then updating to 27.5.11

Tuvestam · ‎Nov 8 2020

Hi, I have all my MR36 in a WiFi template and want to add the MT10 in to that. But the MT10 is not addable to my WiFi networks just the appliancenetwork i have. And there is no MR36 in them.

Tuvestam · ‎Jun 2 2020

No can I have a WiFi templet (only WiFi) in a combined network. All my WiFi should be the same but switches and MX is very different in every network.

Tuvestam · ‎Jun 2 2020

I have combined network without Template (MX and Switch) now i would like to add a WiFi that is connected to a WiFi template. Is this doable.

Tuvestam · ‎Jun 11 2019

With VLAN you can split your switch in to man switches/Network.

Tuvestam · ‎Feb 8 2019

I need to get a log of people that has access to the camera and see if they look at a video. This is because the camera is in public place at work and we are not allowed to monitor. Just watch it in case of theft or other circumstances

Meraki

Community

About Tuvestam

Tuvestam

Daniel Tuvestam

Community Record

Badges

Camra not shown i App (iPhone) but in web

Re: Computer shows splash page but there is no configuered

Re: Computer shows splash page but there is no configuered

Re: Computer shows splash page but there is no configuered

Re: Computer shows splash page but there is no configuered

Re: Computer shows splash page but there is no configuered

Computer shows splash page but there is no configuered

Re: SSO On Mobile App

Re: SSO On Mobile App

Re: SSO On Mobile App

Re: MT10 in to a WiFi template

MT10 in to a WiFi template

Re: Combined networks with WiFi template

Combined networks with WiFi template

Re: Community Challenge: VLAN Explained

A log of who is watching a camera

Re: Computer shows splash page but there is no configuered

Re: MT10 in to a WiFi template

Re: Computer shows splash page but there is no configuered

Re: SSO On Mobile App

Re: SSO On Mobile App