Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About tantony
Community Record
305
Posts
61
Kudos
4
Solutions
Badges
Apr 12 2019
11:39 AM
I did have the MX connected to the dashboard after I made the changes. So the dashboard says "configuration upto date" So, the MX should have the latest config. I can try connecting the MX to the internet, but I just thought since the dashboard says config up to date, it will work.
... View more
Apr 12 2019
11:29 AM
@kYutobi "I'm sorry if I'm not understanding you correctly but if you are asking me why the Juniper works and the MX doesn't would be because MX is "cloud" controlled and the Juniper can be configured from within it." So according to your reply, the MX does need connection to the cloud to work, even the LAN. Yes, I connect to the Juniper router and config the configuration using Putty. But, the MX of course is configured from the cloud.
... View more
Apr 12 2019
11:24 AM
The switches are Netgear. I have 3 VLANs on the Meraki, I'm expecting to get the correct VLANs on the switch also. To test it's not my switch config, I created the same VLANs on a Juniper router, and connected it to the same switch I was connecting the MX. When I connect a laptop to the switch while on Juniper, my laptop gets the correct ip depending on which port on the switch I'm connected to. But when I connect the switch to the MX, the laptop does not get any ip, instead I get the 169 loop back.
... View more
Apr 12 2019
11:20 AM
Ok, but why doesn't the switch get the config from MX, but on the MX dashboard it says "configuration upto date". The Juniper router I was testing (which have the same VLANs and trunk ports as the MX) works.
... View more
Apr 12 2019
11:11 AM
Does Meraki MX need connection to the Meraki cloud / Internet to work? I have a Meraki MX configured for VLANs, I connected it to our ISP, and I got the solid white light. When I logged into the dashboard, it says "config up to date". I disconnected it from the internet, and I setup my switches to see if works. The switches are not getting the correct VLANs. I created the same setup on the MX on a Juniper router, and when I connect the switch to the Juniper router, it's working. The Meraki and Juniper have the same exact configuration. So why doesn't the switches work when it's connected to the MX (not connected to Internet), but it works on the Juniper router (not connected to Internet)? I know the Juniper saves its config on the actual device and the MX does not. I don't understand. If MX only works when it has Internet connection, does that mean that if I loose Internet, the LAN stop working?
... View more
Apr 11 2019
4:42 PM
I have 3 VLANs on my MX68. Is there an advantage or disadvantage for making one port on the MX a trunk port for all 3 VLANs vs having individual ports for each VLAN?
... View more
Apr 8 2019
1:55 PM
Sorry for not being clear. I was asking about connecting Meraki router to a switch. The ports on the Meraki router is on trunk mode. Does the switches have to be ok trunk mode also?
... View more
Apr 8 2019
12:57 PM
Sorry if I'm in the wrong forum. I have the ports on the Meraki in trunk mode. Does the switch port need to be on trunk mode also? Can I make the switch ports access?
... View more
Apr 4 2019
4:30 AM
Thank you. I don't have the VoIP router and phones in place yet, but just wanted to know how it all comes together.
... View more
Apr 4 2019
12:36 AM
We’re looking at VoIP phones. Service is through Comcast. They’re using Edgemarc router for it. How would that work with the MX? Do I create a voice VLAN on the MX? Do I need a static route between MX and Edgemarc? The VoIP phones comes with 2 built in 1Gb switch ports, so cable goes from wall to a port on phone, then second phone port to computer. How does the phone ports know about VLANs? Is this something I need to configure on the phone? Also, im using Netgear switch. Not that it matters.
... View more
Apr 1 2019
5:07 PM
I made up that MAC address. So how can I fix the message? Is it normal?
... View more
Apr 1 2019
11:39 AM
vap: 0, vlan: 4, ip: 172.16.129.3 « hide router 172.16.128.1 subnet 255.255.192.0 dns 172.16.0.25 172.16.0.26 duration 86400 server_ip 172.16.128.1 server_mac 12:34:56:78:90 This is for VLAN 4, but same type of message, vap: 0
... View more
Apr 1 2019
8:23 AM
I have certain subnets blocked from the internet. Is there a way to show a splash page so that when a user tries to access the internet from the blocked subnet, a message? Something like this (see link), but for Meraki MX. The link below is for MR. https://documentation.meraki.com/MR/Group_Policies_and_Blacklisting/Configuring_the_Default_Block_Message
... View more
Apr 1 2019
5:47 AM
I'm in the process of modifying our network, and I noticed that I'm getting this in the event log. I know vlan: 3 is for VLAN 3, which is correct, but what does vap: 0 mean? Apparently, it's for wireless, but I have a MX68, and it doesn't have WiFi. Just wondering what this means, and how can I fix it? "vap: 0, vlan: 3" I think I know the answer. Right now, we have everything on VLAN 1 on our Cisco router. But, I have a Meraki test network in my office which is using VLANs (2,3, and 4), so I guess my laptop is connecting to our existing WiFi network, which is on VLAN 1, and the Meraki is confused because on the Meraki, there's no VLAN 1? Am I right?
... View more
Mar 29 2019
9:55 AM
How can I setup access lists on MX? I'm trying to configure the MX like our Cisco router which have ACLs.
... View more
Mar 25 2019
3:13 AM
This is our third modem. This one is less than one month old. When you say routing mode, what’s does that mean? Bridge mode is disabled on the modem. Should it be enabled?
... View more
Mar 24 2019
2:02 PM
I’m not sure if anyone had this happen, but I noticed that if I unplug the router from the modem, and just connect a laptop to the modem, the laptop will not have internet if I use a peer to peer program such as BitTorrent. I have a Comcast business modem.
... View more
Mar 22 2019
12:58 PM
I don't have the new MX connected yet. Still using the old Cisco router, and having same issue. I noticed that if I connect a laptop to the modem and try to download a file using P2P application such as bittorrent, the modem looses internet connection. My modem is not in bridge mode, I'm thinking about putting it in bridge mode so the routing capabilities of the modem is turned off.
... View more
Mar 20 2019
12:49 AM
Thanks. Just to make sure I understand, it doesn’t matter if I use trunk or access ports on the MX, the switch still needs to have VLANs. Lets say I decide to use VLANs 1 192.168.1.0 2 192.168.2.0 3 192.168.3.0 I can make 3 access ports on the MX for each subnet. I could then make one switch on VLAN 1, second switch VLAN 2 and a third switch VLAN 3 and make the switch ports also access ports. Am I right? I understand with the preferred way it’s better for scalibility, but if I know I don’t need more than 3 ports on the MX and I have spare ports left on then MX, then I can use this way.
... View more
Mar 19 2019
12:01 PM
So I'm still having this issue. I disabled advanced malware protection and content filtering. Still same issue. Called Meraki, they think it's a hardware issue. They're sending me a replacement MX, should be here tomorrow.
... View more
Mar 19 2019
7:17 AM
Thank you. I'm not too familiar with Wireshark. So just to make sure it's not the Meraki that's causing the Internet outage, I turned off all the content filtering, and AMP (Advanced Malware Protection). I have the Meraki connected to the Comcast modem, and a laptop connected to the modem. Now, I'm noticing that when ever the laptop connected to the modem looses internet, the Meraki looses internet also. When I had AMP and content filtering on, the laptop connected to the modem never lost internet even when the Meraki lost internet. It looks like it's the ISP now. Plus, the Meraki is recovering from Internet outage much faster.
... View more
Mar 18 2019
10:08 AM
I'm doing a packet capture on the MX Internet interface to Wireshark. I'm noticing that I'm getting a lot of these RST flags. What does that mean? How can I stop this? I think this is why the MX keep loosing internet connection till I unplug the cable from the modem and plug it back in. The source is 10.1.10.4 (Mearki WAN)
... View more
Mar 18 2019
4:25 AM
Thanks. Can the cameras cause intermittent internet outages? I could put the policy to blocked on the cameras to stop them from leaving LAN traffic?
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 2316 | May 17 2019 12:25 PM | |
| 18281 | May 10 2019 7:18 AM | |
| 11256 | Apr 15 2019 6:02 AM | |
| 42380 | Jan 29 2019 9:26 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 6 | 27325 | |
| 4 | 2166 | |
| 4 | 79512 | |
| 3 | 3485 | |
| 2 | 2877 |
© 2024 Cisco Systems, Inc.
