Thanks, I just saw that. I have my WAN 1 as the primary uplink, and I have load balancing enabled. My public keeps changing from Comcast and Verizon. The websites are loading slow. Should I turn off load balancing?
@NolanHerring wrote: Turn off loadbalancing. that slower DSL sounds like the purpose is for redundancy.
I would only use load-balance if you have two good/fast pipes
And to add to that, if you're going to use load balancing then you really should make sure the bandwidth settings for the links are set correct at the top of the Trafic Shaping page. This way traffic is balanced proportionally to the bandwidth available for each link.