See below.  Can't you just use the option, "Traffic not to/from"?       For example, if I want to allow traffic from and to the US but no other countries I can add the rule that reads like this, "Deny Countries Traffic not To/From United States" ... View more

Has anyone found that the MA-ANT-C1-B or any other external antenna will work with an MX67C? ... View more

You can find it here: v1-beta - Meraki Portal What's New & Changelog - Cisco Meraki Developer Hub and search for "wake" ... View more

(From a distant place) Currently, my Internet connection is over 5G "Mobile broadband". There is a lot to like about it, but, many ISPs use CGNAT, (for reasons of unplanning and economy), this causes high latency, fortunately, I don't play computer games where this matters. Apparently it makes many online games unplayable, without some "jiggling around". Predictably, ISPs that use CGNAT are in denial. Allegedly the problem doesn't exist if the WAN interface can be configured to use IPv6 whilst leaving the LAN side IPv4. ... View more

You need to set your VPN client to register in DNS.      By default this is not checked. ... View more

API for the MTs is currently in Beta.  You can contact Meraki Support to enable it on your Organization.   Once it's enabled, you should be able to see the endpoints under Help > API Docs. ... View more

Thanks guys - this worked to fix my Cisco VPN on a Thinkpad running Windows 10 going thru a Spectrum Router or a TP Link Deco mesh system. This has been driving me nuts for years. I assigned an arbitrary metric of 5 to the ethernet and 4 to the VPN. Bingo  - worked immediately and tested thru all combinations. Happy New Year and Stay well! ... View more

Thank you very much @MeredithW @ ... View more

Well done everyone! ... View more

Glad to hear it worked. I know it saved me a ton of time when it was given to me. ... View more

I use 12Mb/s 99% of the time for maximum compatibility.   The rest of the time I use 54Mb/s to make for the smallest coverage footprint in which a user can connect. ... View more

@NolanHerring Thanks, that's exactly what I needed to know   @PhilipDAth Not a bad idea, but this is a home for our companies owner. Aesthetics are important, but a cover still clashes with the decor. Not nearly as bad as an exposed AP of course.    Fortunately we were going to light the place up and rewire, but his expectations were different than what I was initially given from my boss. He were going for complete coverage and he's of the mind to just throw them in closets because his current setup just needs updated and a few holes plugged more than anything haha.     ... View more

@CN this is so cool, thanks for sharing and thanks for introducing the idea to us in the first place 🙂   Here's the abstract to save you a click (though, of course, the rest of the paper is worth a perusal and they'll be updating with new info as it becomes available). So exciting to know we have been part of such an impactful project:   ... View more

I've been working on learning it for awhile now. Unfortunately I can't seem to manage not being pulled in 100 different directions on a daily basis so it's not going as fast as I'd like. ... View more

MRA on the expressway is the way to go, but it only supports 7800/8800 series phones. Jabber is also supported, so you can deploy jabber as a full client or soft phone only mode. ... View more

I figured it wasn't something possible. I have policies built, but I can't ensure they are used instead of white listing is all unfortunately.    Thanks ... View more

Well, basically you‘d simply have to iterate through your networks and create clients (if not yet available) or update those. The API makes it possible. ... View more

@PhilipDAth It's set to 30 because I couldn't get it to go any higher, I have them in bridge mode because I cannot get a cable between them and I'd like to increase the power some to try and get a little more bandwidth.     ... View more

@MattPainter701 The solution works like a charm for us. I've not tried the PS script as I just logged into the forums so I cannot comment on that solution. If you use the MDM there is an option for VPN's listed, but I've never used it before. ... View more