Thanks Guys,    I got it what you means to say and I understood where I was wrong. I think @jdsilva is right and I have to think of that. Also I referred the document that is being sent by @nealgs. I understood the concept and I cannot port-forward single to multiple LAN IPs. I cleared all my doubts now and will help to resolve my pain.   I appreciate the help given by you guys. ... View more

All answers so far is correct.   This is the compatibility guide. https://meraki.cisco.com/lib/pdf/meraki_datasheet_sfp.pdf  ... View more

>if they leave the building and come back, will they have to login, or should it remember them?    It will remember them. ... View more

I've been using Win 10 VPN client now for a good few months and it's been stable - i've not had to change or update the VPN client settings at all since probably before new year.   Not sure if an Windows 10 update has resolved the problem or what. ... View more

Good to hear that it's working for someone else CMDRTucker 👍   We've been running it since August last year, scheduled to change password for guest wifi on site every friday at 4pm with an email sent out to reception and our support team. Reception print email out ready for visitors to site over weekend and following week.   Has worked very will since with only a couple of hiccups which where down to the machine the scheduled task was running on rather than the script itself 🙂   Any questions about the script - give me a shout. ... View more

Thanks for the info. I have came to the same conclusion.   To me such a basic feature missing.  ... View more

that is true 👍 ... View more

Just wondering, do you have "client balancing" enabled?   This can be found on the rf profile.   On event logs, look for rejected due to load balance or something like that, let us know what happens with the new ap ... View more

Ok. I will contact my ISP for changing their router config to bridge mode.     ... View more

aha!, thanks MeredithW - thought it was old age creeping in 😄 ... View more

woohoo! - great stuff 🙂 ... View more

are you trying to get client vpn on ubuntu to connect to MX100?   Meraki client VPN support is a bit lacking in a lot of areas - not sure if this thread helps you:   https://www.reddit.com/r/meraki/comments/9hd1x0/client_vpn_on_ubuntu/   we've tried using Microsofts inbuilt client in Win 10 which does work except for an issue in windows which changes the configuration back to a default setting which doesn't work.  ... View more

Right, I shall give that a try! ... View more

If you are looking for managing/automating changes for equipment from multiple vendors ( or Cisco and Cisco Meraki), you may want to look at a product like https://www.ansible.com. Otherwise @NolanHerring is right in saying you can't manage non-Meraki equipment in the Meraki dashboard. ... View more

cheers diib - will give that a try and see what happens 🙂 ... View more

I have the same situation (although on a much smaller geographical scale).   40 separate buildings with people sometimes traversing between them.  One organization, 40 'networks' beneath them, an SSID configured identically between all 40 buildings to allow those folks to roam. ... View more

Yes, you do need to use VLANs to define multiple subnets in the MX. ... View more

We ended up removing the MX84 from service but good to know this is resolved. We were told by Meraki that this was expected behavior and would never be resolved. Thank you for letting me know! ... View more

all sorted now, was resolved later on Tuesday afternoon 🙂 ... View more

For anyone who finds this, I solved my problem by upgrading the WiFi drivers to the latest available. Lenovo's drivers were dated 2012 I upgraded using drivers downloaded directly from Intel's website. With the latest version installed the drivers were updated to 2017 and the problem is no longer happening. ... View more

If you plug a client in via a network cable and print is it still slow?  If so, it is not likely to be a network issue. ... View more

@Christian_Lopez - well spotted! But this isn’t the post he was hiding in - he was hiding in a post in Product and Technology Discussions.  ... View more

Have to agree with  PhilipDAth on this one - remove Admin or local admin rights to the PC for users.   We're just going through a windows 10 migration and only IT staff now have Admin rights - any software installs come through IT helpdesk.  Yep it does increase support calls etc, but does mean less chance of dodgy software causing mayhem on the network etc due to virusesssssss etc.   We did block shareware related sites, but had to open up sourceforge.net in order to download some software for IT to use -  lol.     ... View more

Another update/addition to this regarding icons on the Map view - they don't appear until you do a zoom operation now 😞     ... View more