Meraki

SimJim · ‎Jan 12 2021

Is there a way to do this automatically for all users? From what I can see, you have to highlight a user before you can make any changes to their expiry date. I can see accounts that were setup in September 2020 and still active. Thanks for any information.

CCL_CO · ‎Oct 23 2020

Hola @AjitKumar Me faltaba colocar la vlan en ambas partes en all other AP´s, agrege el AP a la subred y funciona, aunque los cambios se estan demorando mucho, debe ser el dashborad. Muchas gracias por su ayuda

LeonJVR · ‎Sep 13 2020

Hi @AjitKumar, Thank you for the quick response I have read a few threads but not the one you have linked. I will read through it and try to configure the devices and revert back if it has worked.

Shadius · ‎Aug 26 2020

I was able to figure it out! I used the local status page and statically assigned an IP address. I got the switch from Meraki. Thanks!

CharlesIsWorkin · ‎Jul 14 2020

@PhilipDAth Yes, I am currently recieving this false positive myself, I don't get as to why it would appear. I have two internet connections coming in with no firewalls on the modems.

Nick · ‎May 31 2020

Indeed congratulations all!

GIdenJoe · ‎May 20 2020

I got it mixed up: It's when your route comes from another source than BGP and is preferred over the BGP route it only displays the preferred route source (like VPN peer).

CharlesPom · ‎Apr 15 2020

Thanks for your Hint. Nice share.

Qing · ‎Mar 15 2020

shorten the splash page interval, can help a bit only.

Guerino · ‎Mar 13 2020

Bom dia, Não é necessário desafazer o cluster. Quando você força o upgrade em um cluster, o MX "agenda" o upgrade para 10 a 15min antes do horário " agendado". Antes de fazer o upgrade o trafego é direcionado para o Spare do cluster, só então é feito o upgrade do software. Após atualização a caixa estando operacional o trafego volta para MX principal do cluster. Quando trafego esta na caixa principal é feito upgrade do spare. Caso tenha qualquer problema no software o MX retorna a versão antiga. Todo esse processo já vivencie e não tive nenhum impacto para os meus clientes. A disposição Renato Guerino

BFrança · ‎Mar 5 2020

Thanks for everyone's quick return. There must have been some mistake in the information given by the instructor. Thanks.

renanmonteiro · ‎Feb 22 2020

Thanks, I will close this topology this week. After that I reply you

AjitKumar · ‎Feb 20 2020

Hi @munaf I shall suggest go for "Advanced Security License". You may have look at the following Url (To know the difference between both the License Types) https://www.syndicateinfo.com/post/what-is-the-difference-between-the-enterprise-and-advanced-security-licenses-for-mx

SamanthaLu · ‎Feb 19 2020

Thank you! 🙂

BrechtSchamp · ‎Feb 18 2020

Oops, late to the party. Congratulations and celebrations to all you fine people! Literal celebrations are so good 😍

Aamir · ‎Feb 10 2020

thanks a lot.

Patrick777 · ‎Feb 7 2020

That’s a bummer. thanks for the answer!

petermlamont · ‎Feb 6 2020

Thank you very much @GreenMan & @AjitKumar . I will give it a go and revert. Cheers

AjitKumar · ‎Feb 4 2020

"Onsite" an engineer will visit you to assist in installation 🙂

Silas1066 · ‎Jan 27 2020

I haven't tried that, but I would imagine that if you have Meraki access-points and a MX, the reporting would still work. You just wouldn't get any info about the switches

cmr · ‎Jan 15 2020

@hockeydude you are correct that one flow will only use one link but if you have more than one flow going on then both links should be active. This should be the case in most circumstances.

mr-butcher · ‎Dec 19 2019

I just had the same Issue. I opened a ticket at meraki support and they told me, that it's a bug in 11.27. After upgrading the switch to 11.29, PoE functionality was successfully restored.

bdw72 · ‎Dec 17 2019

Turns out the vendor vpn was not working properly, they moved it to a different firewall and I can ping their internal address. Thank you for all your replies, I am slowly learning how this works, much appreciated.

Mr-cook · ‎Dec 12 2019

Thank you

BrechtSchamp · ‎Dec 11 2019

Don't overthink it. Hidden SSID with a nice PSK broadcasting on the APs near the tv. And then limit what that tv can do based on preference and desired security level. E.g. NAT mode ssid if you just want it to access the internet. In the regular vlan if you want casting features. In its own vlan if you want some more control and visibility. Suitable firewall rules to limit access to the rest of the network and the internet. Some links to check out: https://documentation.meraki.com/MR/Other_Topics/Using_Tags_to_Broadcast_SSIDs_from_Specific_APs https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/SSID_Modes_for_Client_IP_Assignment https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Wireless_Client_Isolation https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/MR_Firewall_Rules

About AjitKumar

AjitKumar

Ajit

Community Record

Badges