About petermlamont

petermlamont · ‎02-06-2020

Thank you very much @GreenMan & @AjitKumar . I will give it a go and revert. Cheers

petermlamont · ‎02-05-2020

Hi @AjitKumar yes that is part of the answer. Do I need to set up two routers, or can I do this with the one MX and use both WAN ports (one for Internet, the other for SIP)? Would I need to set up a static route between and then port forward? Cheers

petermlamont · ‎02-05-2020

Thank you Ajit. The MX is connected to the Meraki dashboard. The SIP line into our building is separate to the internet connection (2 different ports on the NTU), therefore would need to connect to a second MX port. Perhaps my first question should have been "Can the MX68 take two external WANs simultaneously?" I see there are 2 WAN ports, but is this simply for redundancy?

petermlamont · ‎02-05-2020

I'm just starting out with a Meraki MX68 and need to route SIP lines from our VoIP provider and data traffic from our internet provider to our internal LAN. Additionally, we have remote users who point their VoIP handsets to our public IP which is port-forwarded to our internal PBX. I see many options on the MX but not sure where to start. Can someone point me in the right direction please?

petermlamont

Community Record

Re: Routing 2 networks in MX68

Re: Routing 2 networks in MX68

Re: Routing 2 networks in MX68

Routing 2 networks in MX68